MikeXM
Well-Known Member
- Joined
- Nov 30, 2019
- Messages
- 821
- Reaction score
- 757
Here is my last iteration on the subject:
I found out that the LX4 left-overs have a tendency to dry-up when leaving an empty bottle for too long. When you fill back the bottle, you find some flakes in the liquid. Those flakes don't seems to dissolve after going back in fresh LX4. I'm not going to put those flakes in my fuel tank... So not more refillable bottles for me.
I found a source for cheap 5oz PET bottles, so now I'm making my own use-once bottles.
The blend I use is the following (for the 31gal tank):
- 3.1oz of LX4
- 2.5oz of EDT
This fills the "5oz" to the brim.
Here is a picture:
Not shown in the picture are the required seal liners.
I found out that the LX4 left-overs have a tendency to dry-up when leaving an empty bottle for too long. When you fill back the bottle, you find some flakes in the liquid. Those flakes don't seems to dissolve after going back in fresh LX4. I'm not going to put those flakes in my fuel tank... So not more refillable bottles for me.
I found a source for cheap 5oz PET bottles, so now I'm making my own use-once bottles.
The blend I use is the following (for the 31gal tank):
- 3.1oz of LX4
- 2.5oz of EDT
This fills the "5oz" to the brim.
Here is a picture:
Not shown in the picture are the required seal liners.