What’s the wheel width on the 20s?
8” I think but those wheels did not last long. The 35’s did not fill out the wheel wells as much as I wanted so I put 37’s on and ditched the 20’s for 17” saltas.
Sent from my iPad using Tapatalk
What’s the wheel width on the 20s?
Looking good! I’ve been struggling with the 37 setup with AEV vs aftermarket.. I want my setup to be flush with flares and I’m concerned the 8.5” with 37x12.5 will still rest tucked in...8” I think but those wheels did not last long. The 35’s did not fill out the wheel wells as much as I wanted so I put 37’s on and ditched the 20’s for 17” saltas.
Sent from my iPad using Tapatalk
Looking good! I’ve been struggling with the 37 setup with AEV vs aftermarket.. I want my setup to be flush with flares and I’m concerned the 8.5” with 37x12.5 will still rest tucked in...
Great looking truck! Any regrets going to 37s? How do you feel about the spare on the rear bumper? Did you relocate the backup camera? Thanks!8” I think but those wheels did not last long. The 35’s did not fill out the wheel wells as much as I wanted so I put 37’s on and ditched the 20’s for 17” saltas.
Sent from my iPad using Tapatalk
Great looking truck! Any regrets going to 37s? How do you feel about the spare on the rear bumper? Did you relocate the backup camera? Thanks!
Thanks for the reply! Great set-up for the spare!The spare is on a RIGd mega swing, I am a huge fan of the carrier I have a fuelpax on there as well. I have no regrets about going to 37’s the truck is simply better than stock. I run about 45 psi on the road and it is smoother and more comfortable.
Sent from my iPad using Tapatalk
Nice! What’s the exact wheel and tire setup? Really like the look of this!
Look great but looks like you will rub if you go off road. Heck looks like if you crank the wheel in reverse youbwill rub.View attachment 16454
CJC Offroad Edition 17x9” Methods (correct width and offset to fit 37s with no/minimal trimming) and 37x12.5R17 Nitto Ridge Grapplers.
The CJC Methods are just like the AEV Ram wheels in that they have the correct width and backspacing to run big tires on these Rams.Look great but looks like you will rub if you go off road. Heck looks like if you crank the wheel in reverse youbwill rub.
How much trimming are we taking? This is exactly the look I want but don’t want to hack my inner wellView attachment 16454
CJC Offroad Edition 17x9” Methods (correct width and offset to fit 37s with no/minimal trimming) and 37x12.5R17 Nitto Ridge Grapplers.
Wheels with proper width/backspace and offset are crucialHow much trimming are we taking? This is exactly the look I want but don’t want to hack my inner well
I am running the AEV wheels with 37x12.5 Toyo MT's with the Thuren springs and have zero rubbing with no trimming or anything else.Wheels with proper width/backspace and offset are crucial
Like I said, I massaged/shaped my liners prior to getting 37s. This was just at the very bottom of the liners near the pinch weld. When my mudflaps were off, I had zero rubbing daily driving.
Ill DM you a vid.
off the subject but are you happy with that front hood guard?Got my 35X12.5X18 Nitto Ridge Grapplers and Method 305 NV wheels with a +18 offset on today much better for me