Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
They are still working like a champ. Just to be clear, my post above was just for the front two wheels because they came from the factory with out sensors. i have replaced 1 of the 3 rear wheel sensors with the same sensor from my previous post. I was able to attach the metal stem and have had...
I forgot to mention that there are open ports on the back of the forward USB ports to plug your extension cable into. It makes for a clean install. When you remove the forward aux port you’ll
Part 68096423AC should be long enough to connect the usb in the front dash to your new rear USB ports. This should also allow any devices to connect to the Uconnect system.
You’ll have to do some additional wiring if you want them to illuminate with the interior lights.
I have not added the...
I had to run a USB jumper cable from the back of the USB port on the lower part of the dash, under the carpet to the new USB port for the 2nd row. I ordered part no: 68096423AC.
I'm almost finished with this mod. I'm just waiting on the factory usb harness, but confirmed that it does work with a temporary usb jumper cable.
Here's what I had before:
Here's after:
For the new face plate I ordered part no: 6QT85TX7AC - Console End Cap - $142.24. Mine came with the...
It’s mounted to the driver side frame rail. I have the factory airbags and the compressor for that is on the passenger side. I’ll try to post some photos soon.
Follow on question then; where did you order your VIAIR kit from?
Thanks for the help by the way. I have a VIAIR kit with the 2.5 gal tank, but there is not enough room on the frame to mount it. So back to the forums to get ideas...
I purchased my 2019 Ram DRW used, and the front tires were not reading pressure and were throwing a warning message when I purchased it. After searching the MOPAR sites for new OEM sensors I couldn't find any in stock. It seems like there is a supply issue with these for the HD duallys. After...
I installed the trailer video connection on the driver side in the bed, just forward of the trailer power connection. I used a fresh pack of zip ties and attached the trailer video cable to a main harness that follows the driver side frame all the way to the fire wall. Getting through the fire...