Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
How do you carry your Jerry cans? I'm planning a long trip this summer and have similar concerns regarding potential for being low on fuel at inopportune times. I would like to be able to securely store at least two 20L cans, but they need to fit under a tonneau cover.
The referenced temp range is correct. My truck, same setup as yours, will run 168F unloaded and while towing on relatively flat land. I've hit low 190s up a mountain pass while towing, but quickly dropped again on the downhill. If your still getting 220F post-replacement, there is something...
On 2022 and earlier models, no need to use the second preset when in tow mode. Simply place the mirrors in tow mode, adjust as desired, set the memory on the first button again, and it will remember the mirror position for up/down orientation. Will make the adjustments when you unlock or start...
I have the exact same setup as you with BedRug and X4s cover. Nice to see an installation that matches my exact needs.
How bad was the installation process, particularly drilling mounting points? I have a strong aversion to putting holes that aren’t factory original, so hopefully these are...
I am not in the market for a 2023, but after monitoring this thread for a while, I thought the 6.4L wasn't available in only the Longhorn and Limited. Can other's confirm you should be able to order a Laramie Megacab with Hemi? If so, may want to double-check with your dealer.
I've had the exact same problems as you. A couple days after taking delivery, the left front speaker went out. Worked fine on next startup and has never ben a problem since. This past weekend, I got the "Tire Pressure Temporarily Unavailable" message. Took a couple of restarts, but it...
Digging up an old thread, but curious if you ever resolved the issue of the 2nd and 3rd button not programming? I'm having the same issue. With a brand new battery, I was able to program the 1st button with no trouble. But the 2nd/3rd button will not accept a code from the handheld remote. So...
Anybody ever have a similar issue to me?
I have a 2-button remote that operates 2 garage doors. First HomeLink button was programmed without issue; super easy. The second button will not accept a code from the same remote. I have programmed multiple other vehicles with HomeLink using this...
It happens. According to the tracker, mine was in production for 16 days. In actuality, it was in JS - Shipped to Storage status. Once it was finally built, it was delivered within a month.
Although not to the same extreme, my estimated delivery also went through a similar back and forth. The original estimate was 7/21, then moved up to 7/18, moved back to 7/28, then moved up to 7/20. Lo and behold, it was delivered on 7/18.
@brv10 The dealer finally got back to me with a status code of JS - Shipped to Storage.
If anyone knows, I'd be curious why a vehicle is placed in storage prior to being built/invoiced. Also, if you were in JS, how long it stayed there?
@brv10 If you have time, could you please look up the current status for VIN 3C6UR5FJ6NG315884? Per the Ram Tracker, it has been "In Production" for the past week. I'm curious to know what the issue is, if any. It is a Laramie Level A with Snow Chief, so I didn't think it needed to go to...