AlfaOBD

[RJ1972]

Could use a little guidance again, please.
Ok, my bypass cable (img attached) is a little different in most colors I'm reading on here. My Green is White/Green wires. My White is Yellow/Blue wires.
On my 2023 2500 Big Horn I have the white plug (yellow /blue) closest to me on the bus (which is green/black bottom). I have the Green plug (white/green) to the furthest bus (green with white bottom).
I have updated the OBDII MX+, including the firmware and PIDs. I have updated the AlphaOBD, all on my Samsung Note 20. I can get pretty much everything to connect in the (body computer, Climate, Doors, seats ECT) AlphaOBD app. I can't get the Comfort to connect. I keep getting this (img attached). Also, can't connect to adjusting tire pressure. Any help is definitely appreciated. Thanks.

 

[Brutal_HO]

I can't get comfort to connect on my 2020 either.

@Jimmy07

 

[Jimmy07]

Could use a little guidance again, please.
Ok, my bypass cable (img attached) is a little different in most colors I'm reading on here. My Green is White/Green wires. My White is Yellow/Blue wires.
On my 2023 2500 Big Horn I have the white plug (yellow /blue) closest to me on the bus (which is green/black bottom). I have the Green plug (white/green) to the furthest bus (green with white bottom).
I have updated the OBDII MX+, including the firmware and PIDs. I have updated the AlphaOBD, all on my Samsung Note 20. I can get pretty much everything to connect in the (body computer, Climate, Doors, seats ECT) AlphaOBD app. I can't get the Comfort to connect. I keep getting this (img attached). Also, can't connect to adjusting tire pressure. Any help is definitely appreciated. Thanks.

I can't get comfort to connect on my 2020 either.

@Jimmy07

I think it’s an issue with the android app on this one. I just tried (it’s a 2021 heated seats module) and got the same message on android version, but connects right away on windows version:

 

[RJ1972]

I think it’s an issue with the android app on this one. I just tried (it’s a 2021 heated seats module) and got the same message on android version, but connects right away on windows version:
View attachment 69092

Thank you Jimmy

 

[Brutal_HO]

I'll check it with Windows.

 

[CFE]

Is the kaodtech the only security bypass option? Finally got around to buying alfaobd on my surface and the obdlink ex cable... just need the security bypass and the kaodtech is sold out currently.

 

[Jimmy07]

Is the kaodtech the only security bypass option? Finally got around to buying alfaobd on my surface and the obdlink ex cable... just need the security bypass and the kaodtech is sold out currently.

I can supply them when he’s out. Send me a PM.

 

[ahntime]

Good morning @Jimmy07 , I would like to acquire a cable from you as well. I have a 2022 2500. Please let me know specifics on how to order from you.

 

[Caleyvtwin]

Good morning @Jimmy07 , I would like to acquire a cable from you as well. I have a 2022 2500. Please let me know specifics on how to order from you.

Send him a PM. He can fix you right up.

 

[drpringle]

Need help
After installing a 4” bds lift I noticed my truck was a little low in the rear (about 2”)and my alt trailer height button and bed lowering mode didn’t do anything
Figured I go in and have a look on my JScan
I preformed an air suspension calibration and now
The rears higher by an inch the bags clearly have to much air in them and I’m bouncing down the road terrible ride I want it back to where it was but every number I put in the measured height box doesn’t change my finished height I’ve tried 1-100
And it’s the same
Any thoughts ?

 

[pete2833]

@Jimmy07 I was looking for the Transmission Quick Relearn on the windows version for my 2023 Ram 2500 6.7.
I can't not find it under Active Diagnostic. Am i doing something wrong or is not an option for 2023 ?

Thanks