dirt-merchant
Member
- Joined
- Nov 1, 2021
- Messages
- 51
- Reaction score
- 22
You able to get through most of the canyons there? Thinking about a trip there, worried about getting caught in there...Yes it is.
Sent from my SM-F946U1 using Tapatalk
You able to get through most of the canyons there? Thinking about a trip there, worried about getting caught in there...Yes it is.
Sent from my SM-F946U1 using Tapatalk
Re your decals: to get the tracer decals with the two tone paint: a) were you able to order it that way? (online build doesnt seem to allow that combo), or b) order decal delete and then remove the RAM badge on the doors and then purchase and apply the tracer decals?, or c) order monotone paint, which adds the tracer decals, and then have your own lower stripe added as paint/ film /wrap? I like this combo, think I’d replicate it.I came from a 2019 GMC Sierra 1500 6.2 with a 6" Rough Country lift. My 2022 PW rides much better. I added 315/70/17 KO2s and still has a smooth ride. Ive had alot of trucks and this one is my first Ram and by far my favorite.
If you don’t mind sharing, what light bar is that and how’s it mounted?Yes, most of the trails are pretty wide for majority of the trail. There is a small portion that narrows towards the end. We turned around after this.
Sent from my SM-F946U1 using Tapatalk
Yes, ordered that way. Actually was ordered by someone else, they backed out when it came in and I bought it.Re your decals: to get the tracer decals with the two tone paint: a) were you able to order it that way? (online build doesnt seem to allow that combo), or b) order decal delete and then remove the RAM badge on the doors and then purchase and apply the tracer decals?, or c) order monotone paint, which adds the tracer decals, and then have your own lower stripe added as paint/ film /wrap? I like this combo, think I’d replicate it.
If you don’t mind sharing, what light bar is that and how’s it mounted?
So I wanted my lightbar to be tucked in and not to be hanging forward on the bumper. I found a 20" lightbar on Amazon that puts out 10000 lumens and it measured the correct length to fit inside that slot between the bumper and grill. I have not had any cooling issues whatsoever.
Sent from my SM-F926U using Tapatalk
So my dealer (who is putting in my ‘24 PW build order) and I seemingly can’t figure out to check the right boxes for our desired decal package. We want two-tone paint, decal delete (which is all clear to check off on the order sheet) but also want to add the tracer doorside and tailgate decals, which seems not to have any boxes to check on the build sheet. I’m pretty sure this is an available build since the RAM website currently has a picture of one (attached). I’d rather get it done right from the factory than have to remove the door RAM badge then add the tracer decals myself. Anybody with direct order experience or perhaps a dealer-type able to give build form advice? Note, this is a Canadian market build, if that matters.Yes, ordered that way. Actually was ordered by someone else, they backed out when it came in and I bought it.
So my dealer (who is putting in my ‘24 PW build order) and I seemingly can’t figure out to check the right boxes for our desired decal package. We want two-tone paint, decal delete (which is all clear to check off on the order sheet) but also want to add the tracer doorside and tailgate decals, which seems not to have any boxes to check on the build sheet. I’m pretty sure this is an available build since the RAM website currently has a picture of one (attached). I’d rather get it done right from the factory than have to remove the door RAM badge then add the tracer decals myself. Anybody with direct order experience or perhaps a dealer-type able to give build form advice? Note, this is a Canadian market build, if that matters.
You’d think but I’ve seen pix of several ’bare’ ones on this forum. Here’s such a ‘24 on the lot right now..I thought the DECAL DELETE package automatically gives you the Tracer Decals. I don't think RAM sells a Power Wagon without any decals.
I notice the one above was a 2022 model year ... so maybe its a 2023 + thing to have NO decals at all ...You’d think but I’ve seen pix of several ’bare’ ones on this forum. Here’s such a ‘24 on the lot right now..
Not sure if it changed but when I ordered my 23, you could only get the tracer decal with the level 3 package and monotone paint. Otherwise you got the standard decals or full delete.So my dealer (who is putting in my ‘24 PW build order) and I seemingly can’t figure out to check the right boxes for our desired decal package. We want two-tone paint, decal delete (which is all clear to check off on the order sheet) but also want to add the tracer doorside and tailgate decals, which seems not to have any boxes to check on the build sheet. I’m pretty sure this is an available build since the RAM website currently has a picture of one (attached). I’d rather get it done right from the factory than have to remove the door RAM badge then add the tracer decals myself. Anybody with direct order experience or perhaps a dealer-type able to give build form advice? Note, this is a Canadian market build, if that matters.
Then maybe it makes all the sense in the world that the banner truck featured in their Black Friday sales campaign is not one that can actually be built!they have the WORST onsite builders and on-again-off-again ordering options.
Any picture with the just the main lights and light bar?In this photo, I have my lightbar and ditch lights on along with the headlights.
Sent from my SM-F946U1 using Tapatalk
I do but I don't think it does it justice. These are in our cul-de-sac.Any picture with the just the main lights and light bar?
Thanks,
RJ
Thanks for sending - Even using just the lightbar, it's lights it up pretty well.I do but I don't think it does it justice. These are in our cul-de-sac.
1st photo is the main lights and the lightbar
2nd photo is the lightbar only
Sent from my SM-F946U1 using Tapatalk