On one hand I really want one of those, on the other hand I really like having money, but on the *other* hand I really want one of those… Damnit.
On one hand I really want one of those, on the other hand I really like having money, but on the *other* hand I really want one of those… Damnit.
Would like to talk to you about the lomax coverInstalled a Lomax tonneau cover - I couldn't get it to seal 100% at the tailgate, apparently the newer Rams will have 1-2mm of space there. Still like it a lot and this particular finish is similar to bedliner.
View attachment 41537
Pelican BX80 cargo case + universal side mount - Has a lot of potential but expensive and CS is kind of lacking (came packed with wrong carriage screws and CS kept giving me the runaround, ended up sourcing some longer carriage bolts through another company). May use ROAM in the future.
View attachment 41538
Mounted a dashcam, on the dash - Used Bullet Point base, 67D arms I carried over from my Jeep, Tackform Bar Mount (1.25"), and a Blackvue 750X Plus camera. The Ram 12V cig/plugs are the same as the current generation Jeeps, you can get a 12V adaptor (https://www.amazon.com/gp/product/B0886DNNSP) and add a switched or constant power source. I have it set to power on with the truck, no parking mode when off. There are already holes on the top console that you can enlarge (or not) if you need to pass cables through.
View attachment 41539
Would like to talk to you about the lomax cover
i really wanted their truck box...sits too high for the GN as well....even emailed them to see if theyre going to make a low profile version and they said they were they just didnt know when...itd really be awesome if they made something for the jeep so i didnt have to get the goose gear stuff....I’d love to run a decked system but can’t use a gooseneck with one so no go for me.
Seems pretty dumb that in my Laramie there is no lower glovebox light. The plug for power is there and clipped into the blanking plate. Fixed with a $8 Amazon part and less than a minute of my time.
View attachment 46330
Big hole saw!I’d love to run a decked system but can’t use a gooseneck with one so no go for me.
99% done with the install. Gotta tighten the J hooks and attach the ruler/scuff plate. I got busy with trunk or treat at the kiddos school
View attachment 46341
99% done with the install. Gotta tighten the J hooks and attach the ruler/scuff plate. I got busy with trunk or treat at the kiddos school
View attachment 46341
Just searched amazon for ram 2500 glove box light.Mind linking part?
What plug did you use in the bumperTruck ready to stay warm this winter.
You can by it on Amazon not expensive. Had to lengthen the original cord on the back side with a short extension cord. Taped up the ends behind the bumper to water proof the ends to keep the salt out and tie wrapped the cord on back side of bumper.What plug did you use in the bumper