What did you do TO your RAM today?

[Calef_HD]

Installed my Spyder Industries Headache Rack and 3/4 hoop on my 2022 Laramie 2500. I have the Revolver X4S and the headache rack worked well with it except access to the strap clips. Nothing a bungee won’t solve. The 3/4 loop over lapped the X4S rails and didn’t seat well. I’ll need to trim the flange on the loop. The wing bolts are very close to the bed lights and because of that are hard to tighten. I’ll swap the wing bolts out for socket head cap bolts.
I painted the web with Mopar touch up spray paint and clear coat. It came out a better match than the pictures show.

If you cut out the front stake pocket rail covers for any reason, the guide lines do not match up to the opening. Start in the center and work your way out.

I wired the light bars but haven’t made the connection to the aux switch yet. That’s a project for another day.

 

[Rockcrawlindude]

I ordered some Shadow Black Hyper Dip from dipyourcar and it shipped today.

 

[Rockcrawlindude]

Pulled this GD bird’s nest out of my truck grille for the third time. The little F’er had the audacity to chirp at me. (Haven’t been eggs any time) View attachment 38404View attachment 38405

Two days later it’s back again. I hate this animal.

 

[QuattroCS]

Two days later it’s back again. I hate this animal. View attachment 38509View attachment 38510

i know its not funny for you, the persistence is award winning. what is it that it likes i ponder

 

[unclelala]

Two days later it’s back again. I hate this animal. View attachment 38509View attachment 38510

Try pissing on the nest, that should change her mind.

 

[Rockcrawlindude]

Remind me not to let the light come on before I fill up. It hurts less to fill from half. Looks like they can barely keep up removing the stickers before they get restickered lol

 

[Andersen24]

Remind me not to let the light come on before I fill up. It hurts less to fill from half. Looks like they can barely keep up removing the stickers before they get restickered lol
View attachment 38513

Well locally that woulda cost me $159.89! That's funny about the stickers!

 

[Poolmonkey]

Remind me not to let the light come on before I fill up. It hurts less to fill from half. Looks like they can barely keep up removing the stickers before they get restickered lol
View attachment 38513

You have it easy, price-wise….Stick a rubber snake in that nest-hole, folks keep quail and ground squirrels/rats out of heaters sometimes with them here, probably won’t work. ha

 

[Rockcrawlindude]

You have it easy, price-wise….Stick a rubber snake in that nest-hole, folks keep quail and ground squirrels/rats out of heaters sometimes with them here, probably won’t work. ha

Not a bad idea at all! May just work.

I’ve delivered alligator floats to pools where customers have duck/geese problems

 

[RLMandich]

Remind me not to let the light come on before I fill up. It hurts less to fill from half. Looks like they can barely keep up removing the stickers before they get restickered lol
View attachment 38513

My first fill up on my new truck ran me $305....

 

[Grateful Dad]

Not a bad idea at all! May just work.

I’ve delivered alligator floats to pools where customers have duck/geese problems

So not too my truck but loading up the camper for the holiday weekend and what do I find in my pin box?! Has to be the biggest nest I’ve seen (and I have a bunch birds nesting on my property) and lucky no eggs. I have to believe the nest was finished and the bird would be laying eggs anyway now. The “cup” was fairly small but the whole pin box was stuffed.

That last pics sux, should have put something next too it for reference. I’ll see if it’s still there in the morning.

 

[G’Dave]

i need to start researching the same stuff, this seems to be the brand to go to

There are definitely lots of choices, and sometimes you're probably splitting hairs, but if you go with the Husky mats, the X-act Contour mats are very good.

 

[NordicNevs]

Nice 02. Where did you get the bumper and did it come with the top black plastic trim?

I'd like to replace my trim on mine.

Bumper Buyer by Black Patch Performance

Front steel bumpers as low as $999.99. Don't miss out on these sweet savings!

www.bumperbuyer.com

Thanks man.

Bumper came with everything I needed.
Black plastic trim? I went with the heavy duty bumper not the factor one.

 

[2019_Ram]

Added lights in the rocker panel so passengers would quit missing the side steps...

 

[gimmie11s]

Bumper Buyer by Black Patch Performance

Front steel bumpers as low as $999.99. Don't miss out on these sweet savings!

www.bumperbuyer.com

Thanks man.

Bumper came with everything I needed.
Black plastic trim? I went with the heavy duty bumper not the factor one.

Holy cow, I missed that. First pic didn't load for me first go round.

Very nice.

 

[whitexc]

Drove it to work.....leaving work I saw this....

Sent from my SM-G996U using Tapatalk

 

[Brutal_HO]

Drove it to work.....leaving work I saw this....

Sent from my SM-G996U using Tapatalk

Weak, not using the 1/10ths display.

LOL

 

[Rockcrawlindude]

Today I re-dipped my chrome-deleted grille. It has been plastidipped for almost two years. Plasti dip is mostly flat black in appearance when dry. It still looked pretty good but had a few rock chips. I decided to try hyper dip this time.

Keep in mind this is 2 year old plasti dip. This post is not to compare the two products. The plasti dip held up amazingly for two years and about $9 of paint and $6 of tape for the project.



I’m case your were wondering yes it still peels clean after two years. I started at a rock chip and cleaned off a section to test.



This time around I used hyper dip “shadow black” which has a little more of a satin appearance to it and is supposed to be more of a premium product. It costs $17 per can vs $9 a can.

Here is what the hyper dip looks like. Both products take about one can for the grille. I still have to do the rear bumper.

 

[Desertfox73]

Washed her since it looks like no rain for a few days. Well worth the couple hours it takes lol.

 

[G’Dave]

Installed the BedRug Impact truck bed mat. It’s pretty thick and dense rubber. Should do a good job of protecting the bed from unnecessary scratches and dents.

Sent from my iPhone using Tapatalk