What are people using for leveling/lift kits?

[TROYHASABIGHORN]

I tow lots and no front sway bar, no issues even with emergency maneuvers. I had to do one with my 5th wheel on the truck no way i wanted to hit a moose with my camper on lol

so you're saying i can just take the way bar off with no issues?

 

[H3LZSN1P3R]

so you're saying i can just take the way bar off with no issues?

Yep

 

[Rockcrawlindude]

so you're saying i can just take the way bar off with no issues?

No issues here

 

[rmurphy]

put a 2.5" carli in my 2022 tradesman, running 37" wildpeaks on 18" method wheels. minor trimming up front to allow zero rub with anything I do. After install my axle was close to 1" off center. Carli trackbar was 6-8 weeks backorder so I got a rough country one for less than $200 and it worked perfect. Also added airlift 5000lb bags to the rear for my sled deck in the winter and for towing my trailer. Overall the ride is night and day over stock, my wife complains that the truck rides better than her Durango.

 

[Rockcrawlindude]

Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet

 

[H3LZSN1P3R]

Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet

Yes they have been making springs since 09 when the 1/2 tons started getting coils they work good

 

[NightTrain]

Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet

Do you have the Thuren adjustable rear coil spacer? I was thinking of going with the 3" leveling kit for the hemi but wasn't sure if I would like the "dead level" look but, I want the height and thought the rear spacer would be a good/cheap option.

 

[Rockcrawlindude]

Do you have the Thuren adjustable rear coil spacer? I was thinking of going with the 3" leveling kit for the hemi but wasn't sure if I would like the "dead level" look but, I want the height and thought the rear spacer would be a good/cheap option.

I don’t. I have 1” traxada rear spacer that I still haven’t installed.

 

[phatboy64]

Question to those who have lifted their 3500's using the Carli 2.0 3.25" lift Commuter version. I plan to put this on a new 2023 Limited SRW SB HO I ordered (when it comes in). What did you guys do regarding the Sway Bar? Nothing, drop-down brackets, or the Carli torsion bar?

 

[NightTrain]

Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires

 

[Smittys2500RAM]

Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires

Killer looking NightTrain!!! I have seen the Theren 2.75" front coil but not the 3", is this something new? Im in between the Thuren 2.75" front and 1" rear soft ride vs the Carli 3.25 Commuter set up....

 

[NightTrain]

Killer looking NightTrain!!! I have seen the Theren 2.75" front coil but not the 3", is this something new? Im in between the Thuren 2.75" front and 1" rear soft ride vs the Carli 3.25 Commuter set up....

The 3” is specific to the Hemi models. I was thinking of going with the 2” but the 25 year old in me said go bigger. I don’t think you can go wrong with either brand.

 

[Smittys2500RAM]

The 3” is specific to the Hemi models. I was thinking of going with the 2” but the 25 year old in me said go bigger. I don’t think you can go wrong with either brand.

Ah I missed the Hemi badge there the first time around.... Thx!

 

[chas0218]

Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires

Just ordered my 3" thuren coils for the front last week. Should be in tomorrow or friday and being installed next week. I think I'm going to like the dead level look. I'm also picking up a set of 20" wheels and putting 35s on it. That should give it a nice stance. I just need running boards for the wife.

 

[dairyman316]

If my 35x12.5s on my 17x9 +12 dont fit without rubbing im buying that front spacer nice productKe

 

[NightTrain]

Just ordered my 3" thuren coils for the front last week. Should be in tomorrow or friday and being installed next week. I think I'm going to like the dead level look. I'm also picking up a set of 20" wheels and putting 35s on it. That should give it a nice stance. I just need running boards for the wife.

FYI - after installing the 3" coils, my truck was low in the back by 3/4". Every truck seems to be a little different so, you might be dead level after install. I bought the adjustable spacer just in case and glad I did.

 

[chas0218]

FYI - after installing the 3" coils, my truck was low in the back by 3/4". Every truck seems to be a little different so, you might be dead level after install. I bought the adjustable spacer just in case and glad I did.

Yeah if it's low I'll buy the spacer. I'm going to get an adjustable track bar shortly, might remove the sway bar too. From what I've read the mega cabs with the long wheelbase and added weight sit dead level but I'll have to wait and see.

 

[Smittys2500RAM]

Thuren all day!
2.75”/1” King 3.0/2.5
View attachment 4496

Killer truck SCAMHD!! I just got the Thuren 2.75" front and 1" rear with the 2.5 Kings. How much trimming was required for the 37s? Love those TR wheels but damn spendy.....

 

[tchur1]

Killer truck SCAMHD!! I just got the Thuren 2.75" front and 1" rear with the 2.5 Kings. How much trimming was required for the 37s? Love those TR wheels but damn spendy.....

What wheels are you running and what is their offset?

 

[Smittys2500RAM]

What wheels are you running and what is their offset?

I have not got wheels or tires yet. Running the stock 20s with 285/60/20