Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I can't verify MY22, but attached is the info for the MY20 VIN posted.
I'll have to see if I can get someone to work with me on ordering them then.
Check out this post by Jimmy07, he posts a list of all of the MY22 tailgate handles. I haven't studied them to see if they are the same as 19-21s...but if you have one you'd like me to compare or help out with, let me know.
from what I see, a lot of those P/N are "discontinued" they only have maybe 4-6 active P/N that i can see. Perhaps they are going to a base prep (unpainted) color? I would love if the surround view was the same as the backup though, one less thing to buy.
I'm pretty sure they will be different. I believe the two cameras are oriented at different angles. Which may not seem like a big deal until you are trying to go through the calibration procedure with the surround view.
These should have what you're looking for, if not let me know.Hey I'm looking to see if i can get a part number the whole back cap of the jump seat with power ports out of a truck like this: 3C6UR5KL0KG619232 . Thank you.
Here's a picture of what i'm after, would prefer it with the 115v oulet though:
Those seem to be for the center console, I'm looking for the jump seat end cap.
Ah, I misunderstood...do you have a VIN of a truck that has what you're looking for (those parts were for the provided VIN)? If not, I'll see what I can find when I get back home later today.
No worries, I got that vin from a truck on auto trader where the pictures showed it having the jump seat with rear power ports. I'll see if I can find another, they're tough to find.
When I get back I'll see what shows for that VIN in the seats section.
as far as I can tell you provided the end cap part number for the console, which would fit the 40/20/40 bench and the full console.
I’m going to attach a 2020 VIN for @01Time in case he can’t filter for that 2021 VIN yet. It has the same parts you’re looking for. 3C6UR5CL5LG111080
@n00ber is correct; that is the endcap for the 40/20/40 bench seat. I think the illustration caused some confusion. They typically use the same illustration for all trims/options so there's usually a few or in this case many parts in the illustration that are not listed in the parts list below (when VIN filtered). Hopefully I explained that right...
It appears they're changing p/n's on the media player (radio) faster than you can google search them. Any chance you could pull the media player p/n too?
I believe you wanted the 8.4” non nav, correct? 68467281AE is the part you want, and is for 2021-2022.