What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Exhaust for 2020 2500 Limited 6.4L Hemi

Squatch said:
That box has to be twice as long as the box I got. Is that the 140801BC?
Click to expand...
It's a good 5ft long but nope...140801, decided against the shiny black tip, maybe if it were a matte black.

I don't know if I'd say it is a 'perfect' fit, the body appears to be a bit smaller than OEM (EDIT the body is 2" shorter) so the hangers are a bit stretched (not a huge deal, just a note).
Also 30# lighter than OEM...based on ship weigh (50#)... I put the OEM in the box and came up with 80#.

The tip barely peeks out from under the body, not sure if it is supposed to be that way or just another 'just not quite right' fit because of the 18 vs 19?

Gonna see if I can't wiggle it a little, but the hangers are holding it place rather well, and I'd rather not pull the slip joints apart too far.
 

Attachments

  • 20210723_131352.jpg
    20210723_131352.jpg
    418.7 KB · Views: 76
Last edited:
Gondul said:
It's a good 5ft long but nope...140801, decided against the shiny black tip, maybe if it were a matte black.

I don't know if I'd say it is a 'perfect' fit, the body appears to be a bit smaller than OEM (EDIT the body is 2" shorter) so the hangers are a bit stretched (not a huge deal, just a note).
Also 30# lighter than OEM...based on ship weigh (50#)... I put the OEM in the box and came up with 80#.

The tip barely peeks out from under the body, not sure if it is supposed to be that way or just another 'just not quite right' fit because of the 18 vs 19?

Gonna see if I can't wiggle it a little, but the hangers are holding it place rather well, and I'd rather not pull the slip joints apart too far.
Click to expand...
Nope, mine is same way and happy it is sits back.
 
Well, i went and joined the bandwagon. The Borla fits and sounds good on my 2019. It's not that loud at all, at least inside the cabin and I don't hear it once at speed and barely on the gas. I just hope i don't regret it after pulling my travel trailer around for a few hours.



 
Need someone to put a load on the engine then report back. I imagine the engine screaming at 4000 rpm pulling a load up a grade. My wife would kill me :D
 
Chris1911 said:
Well, i went and joined the bandwagon. The Borla fits and sounds good on my 2019. It's not that loud at all, at least inside the cabin and I don't hear it once at speed and barely on the gas. I just hope i don't regret it after pulling my travel trailer around for a few hours.



Click to expand...
Love that blue. The black tip looks good. I’m in Georgia as well, maybe I can hear it for myself one day
 
Hello all!

I googled the Borla installation instructions but couldn’t find an answer. Can someone that has installed this exhaust tell me how or does it account for different cab / bed / wheelbase lengths. Thanks!
 
I don't have the Borla, but I do run a Magnaflow, and there is zero drone towing on mine
 
copcarguy said:
Hello all!

I googled the Borla installation instructions but couldn’t find an answer. Can someone that has installed this exhaust tell me how or does it account for different cab / bed / wheelbase lengths. Thanks!
Click to expand...

Any 2014-2018 exhaust will fit the 2019+ 2500/3500, so if you have a crew cab the Borla will fit.


Sent from my iPhone using Tapatalk
 
Whiskey_Glide said:
Any 2014-2018 exhaust will fit the 2019+ 2500/3500, so if you have a crew cab the Borla will fit.


Sent from my iPhone using Tapatalk
Click to expand...
Thanks for the reply. I have a ‘21 3500 CC longbed 4x4. In a previous truck I put a cat back on, I had to cut a mid pipe depending on what wheelbase the truck was.
 
You must log in or register to reply here.
Back
Top