2022 Ram HD Builds and orders - Post and discuss your TRUCK order here! ** NEW USERS READ POST #1 **

[phatboy64]

2500
Billet Silver
Crew cab
Long bed
Lonestar
4x4
Diesel
Sport appearance package
Bed utility group
Premium light group
Level c equip group
Snow chief package
50 gallon fuel tank
Alpine speakers
Rubber floor mats
Rear wheelwell liners

I think that was it

Man I hope you get your truck soon….

 

[Tater86]

Nope, but I did get 10 free oil changes, and a free 100k miles 7 year warranty

Definitely a better freebie!

 

[ShowKiller1]

Got a text from my sales guy. My truck is sitting at the rail yard in Kirby, TX (literally 8 miles from my house) waiting for a semi ride to the dealership.

 

[DP340]

Does anyone know of an upgrade for the 115V outlet in the bed of the 22MY? The 400W is good for charging an electric toothbrush but not much else.

 

[jsalbre]

Does anyone know of an upgrade for the 115V outlet in the bed of the 22MY? The 400W is good for charging an electric toothbrush but not much else.

There's nothing plug and play. The inside and outside 120V outlets are powered by the same inverter. I guess you could install your own somewhere and wire the bed outlet to that, but at that point you may as well leave the stock one alone and just wire up a separate one for high draw loads.

What are you looking to run? The 400w is plenty for charging tool batteries or a laptop, heated blankets, fridges, fans, a coffee pot, etc. It's likely a modified sine wave inverter though, not pure sine, so I wouldn't run sensitive electronics from it directly.

 

[ShowKiller1]

Tracker updated today and says i am scheduled for delivery tomorrow now instead of the 30th.

 

[ShowKiller1]

Arrived at the dealership at about 3pm cst.

 

[Mikerob14]

Congrats! I have to say you win the award for patience! That is an extremely long time to wait for arrival. I’m sure Ram or at least your dealership is throwing in a few IOU’s at you.

 

[ShowKiller1]

I highly doubt they will throw any bones my way. My uncle works for Chrysler so i get family/friends pricing. Also, with the $2k in rebates plus the $500 i get off through my work i should be at $67544 which is about $10k below msrp. Just gotta wait for the 2 recalls to be cleared now.

 

[pacnw1963]

Arrived at the dealership at about 3pm cst.

CONGRATULATIONS...FINALLY!!!

 

[ShowKiller1]

CONGRATULATIONS...FINALLY!!!

Thanks, now the wait for the 2 recalls to be performed

 

[SteveS]

Hello all.

Just got a call from the dealer. Our new 3500 CTD HO SRW Limited (VIN: 3C63R3SL6NG216134) is being built right now. It's in the trim shop today and will go to paint tomorrow. Hopefully it will ship this week. Real ETA once it goes to shipping status.

Order date: 12/2
D1 date: 2/1
Build date: 2/9
Ship date: ?

Vehicle:
2022 3500 LIMITED CREW CAB 4X4 (149 IN WB 6 FT 4 IN Box)

Package:
21M Customer Preferred Package 21M 0
ETM 6.7L I6 Cummins HO Turbo Diesel Eng 12,195
DF2 6-Spd Auto Aisin AS69RC HD Trans 0

Paint/Seat/Trim:
PXJ Diamond Black Crystal P/C 100 APA Monotone Paint 0
*UL Limited Leather Bucket Seats 0 -X9 Black 0

Options:
XXS Upfitter Electronic Module (VSIM) 345
XN1 Trailer Surround View Camera System 995
XH7 Tow-Mode Camera (Wired) 450
XG9 Trailer Tire Pressure Monitoring Sys 445
XF7 Dual Alternators Rated at 440 Amps 295
XB2 RamBox Delete -490
SEB Auto Level Rear Air Suspension 1,705
MDN Mopar Bed Step - Deployable 365
GWA Power Sunroof 1,195
A69 Limited Level 1 Equipment Group 4,185
ASH Night Edition 1,095
AHU 5th Wheel/Gooseneck Towing Prep Grp 545
AD2 Snow Chief Group 255
ADE Cold Weather Group 145
ADB Protection Group 0
ACL DOT Certified Roadside Safety Kit 195 4NU

Take care!
-NewGTGuy

Hello
I just ordered a 2023 truck pretty similar to yours, I was wondering if you have hooked up anything to the VSIM? I did not order that option on the advice of my salesman, but I am wondering if I should add it?
My plans are to use the truck for a new camper I am going to order, I will be adding an air compressor (200amp draw) and mabey a few reverse lights. The salesman said the VSIM is more for commercial use, and PTO ect.

So since you have one on your truck, I was hoping to see what experiences you have had with it, or any advice you may pass on

Thank you
Steve

 

[TimW73]

Intake upgrade!

 

[jebruns]

Intake upgrade!

Looks cool and all, but personally, I would not be able to risk my warranty coverage to do something like that. Just gives them an easy out if you have some engine problems.

 

[Kauffmj1]

Arrived at the dealership at about 3pm cst.

CONGRATS! Great looking truck. Its crazy guys in the 2022 thread are still waiting to take delivery. How they choose what trucks to build and ship is truly bewildering.

 

[ShowKiller1]

CONGRATS! Great looking truck. Its crazy guys in the 2022 thread are still waiting to take delivery. How they choose what trucks to build and ship is truly bewildering.

Yep, and now it sits at the dealer waiting for the recalls to be fixed

 

[Kauffmj1]

Yep, and now it sits at the dealer waiting for the recalls to be fixed

Well, look at it this way. At least you know where it is at the dealer. It's not in some Production black hole or on a train somewhere. Still no less frustrating for sure. I feel for you diesel guys being so close to taking delivery only to have a stupid recall make you wait longer.

 

[jhdram4]

If you have a bench seat for 2022/23 3500 and got the Mopar floor mats. Do the front floor mats cover the front hump? It looks like the husky xact floor liners are passenger and driver footwells but then you buy a separate transmission hump mat for the front. Is that correct?

 

[Kauffmj1]

If you have a bench seat for 2022/23 3500 and got the Mopar floor mats. Do the front floor mats cover the front hump? It looks like the husky xact floor liners are passenger and driver footwells but then you buy a separate transmission hump mat for the front. Is that correct?

I have a Powerwagon with the floor shifter up there, so not sure this applies to regular 2500 and 3500s. My carpet mats and all the rubber ones all do not cover the hump. The mats just sit in the driver and passenger foot wells. I ended up replacing my carpet ones with the mopar rubber all weather ones. I was a little disappointed they didn't cover under the gas pedal area enough where melting snow will fall, but I'm sure that's some legal CYA thing after the Toyota floor mats getting stuck under accelerators years ago.

 

[jhdram4]

I have a Powerwagon with the floor shifter up there, so not sure this applies to regular 2500 and 3500s. My carpet mats and all the rubber ones all do not cover the hump. The mats just sit in the driver and passenger foot wells. I ended up replacing my carpet ones with the mopar rubber all weather ones. I was a little disappointed they didn't cover under the gas pedal area enough where melting snow will fall, but I'm sure that's some legal CYA thing after the Toyota floor mats getting stuck under accelerators years ago.

Thanks. I won't have the shifter. I think my research is pointing to the Husky Xact center hump individual piece will be required to buy.