cdntrucker
Member
- Joined
- Mar 1, 2022
- Messages
- 47
- Reaction score
- 66
Prerequisite here is that one has emptied the vehicle from any electronic devices, and/or have turned off the devices and placed them in a pouch where you have carefully tested that no cell, wifi or bluetooth data can enter or leave.
To stop EMF signal polution in cabin and to control modem/antenna connections one can wire up a radio switch splice with a remote to control the power (on/off) to UConnect nav panel. This method will disable all communication methods. This type of switch can also be used to create a hidden kill switch to cut off power to the ignition. The switches are about $20 and come with two remotes. This method makes it possible to keep the vehicle systems intact and turn on/off the features when needed.
To stop EMF signal polution in cabin and to control modem/antenna connections one can wire up a radio switch splice with a remote to control the power (on/off) to UConnect nav panel. This method will disable all communication methods. This type of switch can also be used to create a hidden kill switch to cut off power to the ignition. The switches are about $20 and come with two remotes. This method makes it possible to keep the vehicle systems intact and turn on/off the features when needed.
Last edited: