Plz doRight. However all these people getting warranty work done just to have the same defective part put back on it and have it squeak and chirp several miles later is a pain in the ass. So I upgraded my pulley, that did not work.
So to eliminate pulleys or bearing i spray the inside of the stock belt with water and the noise went away. Then came back.
So next I’m going to put a heavy duty belt on it. Gates green HD belt. PN K081244HD.
Spraying the water means one of two things. ****ty belt or a misalignment on the pulleys. I’m assuming it’s the belt and when people replacing the belt, it goes away for a short time then comes back.
I’ll keep y’all posted.
Sent from my iPhone using Tapatalk