What did you do TO your RAM today?

[jsalbre]

View attachment 46295

On one hand I really want one of those, on the other hand I really like having money, but on the *other* hand I really want one of those… Damnit.

 

[Darkone]

I’d love to run a decked system but can’t use a gooseneck with one so no go for me.

 

[opfire]

Installed a Lomax tonneau cover - I couldn't get it to seal 100% at the tailgate, apparently the newer Rams will have 1-2mm of space there. Still like it a lot and this particular finish is similar to bedliner.

View attachment 41537

Pelican BX80 cargo case + universal side mount - Has a lot of potential but expensive and CS is kind of lacking (came packed with wrong carriage screws and CS kept giving me the runaround, ended up sourcing some longer carriage bolts through another company). May use ROAM in the future.

View attachment 41538

Mounted a dashcam, on the dash - Used Bullet Point base, 67D arms I carried over from my Jeep, Tackform Bar Mount (1.25"), and a Blackvue 750X Plus camera. The Ram 12V cig/plugs are the same as the current generation Jeeps, you can get a 12V adaptor (https://www.amazon.com/gp/product/B0886DNNSP) and add a switched or constant power source. I have it set to power on with the truck, no parking mode when off. There are already holes on the top console that you can enlarge (or not) if you need to pass cables through.

View attachment 41539

Would like to talk to you about the lomax cover

 

[Rockcrawlindude]

Working on getting this installed.

I Put details about what I had to cut to accommodate the on board air system in my build thread.

 

[arx237]

Seems pretty dumb that in my Laramie there is no lower glovebox light. The plug for power is there and clipped into the blanking plate. Fixed with a $8 Amazon part and less than a minute of my time.

 

[I Love Grits]

Would like to talk to you about the lomax cover

Not the OP, but I had one that I sent back because the seal/fitment was unacceptable. Loved it on my 1500 but the 2 piece rail design just doesn’t lend itself to a quality fit.

 

[IndyRamMega]

I’d love to run a decked system but can’t use a gooseneck with one so no go for me.

i really wanted their truck box...sits too high for the GN as well....even emailed them to see if theyre going to make a low profile version and they said they were they just didnt know when...itd really be awesome if they made something for the jeep so i didnt have to get the goose gear stuff....

 

[werard]

Seems pretty dumb that in my Laramie there is no lower glovebox light. The plug for power is there and clipped into the blanking plate. Fixed with a $8 Amazon part and less than a minute of my time.

View attachment 46330

Mind linking part?

 

[Rockcrawlindude]

99% done with the install. Gotta tighten the J hooks and attach the ruler/scuff plate. I got busy with trunk or treat at the kiddos school

 

[Great White North Eh]

I’d love to run a decked system but can’t use a gooseneck with one so no go for me.

Big hole saw!

 

[123zk]

99% done with the install. Gotta tighten the J hooks and attach the ruler/scuff plate. I got busy with trunk or treat at the kiddos school

View attachment 46341

99% done with the install. Gotta tighten the J hooks and attach the ruler/scuff plate. I got busy with trunk or treat at the kiddos school

View attachment 46341

 

[arx237]

Mind linking part?

Just searched amazon for ram 2500 glove box light.

 

[Rockcrawlindude]

Before and after. Still have a lot of room in the drawers since they aren’t packed very tightly and there is a bunch of room up under the deck still. There is probably 2’ of drawer under the deck.

Just got the stuff that was floating around put away for now.

 

[Rockcrawlindude]

Modified my DeeZee bed mat to work with my decked system. A box cutter worked well. I did come across some metal fibers so these mats may be made out of recycled tires but some diagonal cutters took care of those fibers.

 

[elephantrider]

had to finally swap out the original window panel on the softopper. I went with a solid panel and should have done that from the beginning.

 

[123zk]

Truck ready to stay warm this winter.

 

[Reh Ranch]

Truck ready to stay warm this winter.

What plug did you use in the bumper

 

[123zk]

What plug did you use in the bumper

You can by it on Amazon not expensive. Had to lengthen the original cord on the back side with a short extension cord. Taped up the ends behind the bumper to water proof the ends to keep the salt out and tie wrapped the cord on back side of bumper.

 

[Poolmonkey]

meh…put a pin switch for the overhead light on the snugtop’s hatch. The last had one, it’s been bugging me in the hunting field when the bed lights turn themselves off.

 

[Rockcrawlindude]

I was told by my social events coordinator to load the pumpkins up, so I did. I think the plan was to carve them at the in-laws



But, I also loaded up the single shot nerf guns because Training is important right, @AnthonyD1978 ? So no pumpkins were carved because shooting is funner