What did you do TO your RAM today?

[Great White North Eh]

Mounted my timbergrove bags a week or so ago. Didn't like that they shared air with the parts they provided, so I ordered new airlines and schrader valves.
Found what I think is a good spot for the valves, although I wish I would've put them up higher. Oh well, once I add a compressor they will just be for backup.
Took a hole saw and notched the sheet metal a bit, then cleaned it up with a flapper on a die grinder.View attachment 41856View attachment 41857

Saamooth like the beginning of bikini season!

 

[b307a1]

I realize this is a much older post, but what benefits did you get with the upgrade of the uconnect? What if any features / tools were impacted by the change (hvac controls etc.). Thank you in advance.

I did it for the bigger screen when using the back up camera primarily and everything operated the same as before the upgrade.

 

[DasBoot]

Installed Block8head gauge vent pod for my iDash

 

[AZ Sooner]

Finally got my Vantrue N4 3 Channel 4K Dash Cam, 4K+1080P Front and Rear, 4K+1080P installed today. I used SimpleUSBPort Dash Cam Power Adapter (10-pin Type D) I bought off Amazon. Works perfect

 

[Yillbs]

Finally got my Vantrue N4 3 Channel 4K Dash Cam, 4K+1080P Front and Rear, 4K+1080P installed today. I used SimpleUSBPort Dash Cam Power Adapter (10-pin Type D) I bought off Amazon. Works perfect View attachment 41905View attachment 41906View attachment 41907

I can find type A, B, H, etc, but no D, do you have a direct link to the type D one you used?
Thanks!

 

[Linked4door]

I can find type A, B, H, etc, but no D, do you have a direct link to the type D one you used?
Thanks!

Google is your friend

https://www.amazon.com/SimpleUSBPort-Dash-Power-Adapter-10-pin/dp/B08B91BT9Q

 

[Yillbs]

Google is your friend

https://www.amazon.com/SimpleUSBPort-Dash-Power-Adapter-10-pin/dp/B08B91BT9Q

I used the exact name he gave in Amazon. Thanks!

 

[Ickabod]

Installed BAK Revolver X4S

How is the seal on this? Any water get in during a wash? I am looking at this model. I do have the ramboxes, so I am hoping that wont matter.

 

[RamItHome]

Added PW rock rails thanks to a fellow member selling theirs.

 

[22BlackBigHorn]

Added PW rock rails thanks to a fellow member selling theirs.View attachment 41975

Looks good. I had a 2017 Power Wagon and I got a set for $200 and threw them on. Fit perfect. I beat the hell out of those rails and they didn't even budge one bit. Held the entire left side of the truck off the ground when I slipped off a rock. Dragged it along the board and couldn't tell. They saved my butt that day!

People say these are weak. I say NAH NAH! They were designed and if you installed them, they are a VERY good option to use!

 

[Grateful Dad]

How is the seal on this? Any water get in during a wash? I am looking at this model. I do have the ramboxes, so I am hoping that wont matter.

Had a decent amount of rain a couple of days ago, so far so good.

 

[rayzer12]

I washed it today...
Over the weekend I washed, clayed, and waxed it. I have had it for a little over a month now (still <800 miles). So far I have:
Installed WeatherTech floor mats
Installed N-Fab side steps
2 usb power supplies, 1 in each rear door
had front windows tinted
applied fluid film to the underside
installed new LED headlights and signals (parking lights are white, but flashes orange)
Installed grill lights - come on with cab lights





Oh yeah, I took off the RAM door badges, the 4x4 sport stickers, the 4x4 tailgate badge, and the HEMI badges.

 

[downsc123]

I washed it today...
Over the weekend I washed, clayed, and waxed it. I have had it for a little over a month now (still <800 miles). So far I have:
Installed View attachment 42089WeatherTech floor mats
Installed N-Fab side steps
2 usb power supplies, 1 in each rear door
had front windows tinted
applied fluid film to the underside
installed new LED headlights and signals (parking lights are white, but flashes orange)
Installed grill lights - come on with cab lights
View attachment 42090
View attachment 42091

View attachment 42092

Oh yeah, I took off the RAM door badges, the 4x4 sport stickers, the 4x4 tailgate badge, and the HEMI badges.

what grill lights did you go with

 

[Trog]

You must like cleaning lots of slobber off your windows and interior, LOL. We have one mastiff and she's not getting anywhere near my truck.

After slobber from one, what’s one more? lol


Sent from my iPhone using Tapatalk

 

[Trog]

Just noticed that it appears you have a mat that the dogs are laying on? Appreciate it if you could post the details. Looks like it fits near perfectly.

We are just using an industrial door mat. It fits great and rolls up behind the seats when humans need the back.


Sent from my iPhone using Tapatalk

 

[Trog]

What kind of platform are you using for your pups? I'm debating whether to get a Goose Gear platform with the drawers on top, or just make my own platform.

Just the mega cab seats folded down with a mat to prevent pinch points from the folding mechanism


Sent from my iPhone using Tapatalk

 

[rayzer12]

what grill lights did you go with

I went with the Oracle Lighting Prerunner Grill Kit (Universal). I then made a quick template of the grill space, then cut a piece of plastic (a $4 bell sun visor from auto parts store). Once assembled I glued the assembly to the back of the grill. I know there are smarter people out there that will probably make some great mounting bracket that is easy to install and super effective, but as of now I couldn't find one so I went what I could hobble together.






I am thinking about painting or buying some black screws and then just replacing one at a time, but really unless you are up close you don't notice them.

 

[IndyRamMega]

Installed this guy last night....took it for a 20-25 mile round trip drive to dinner last night....no leaks and unloaded the 69 never got above 140...I have another wheeling trip coming up with just the one rig this time so I'll be pulling around 9500 lbs....I'll post the temps when I get back from that trip....

 

[Chriss626]

Just had the Carli pintop full suspension installed with Fuel rims and 37 Nitto Ridge Grapplers

 

[IndyRamMega]

Just had the Carli pintop full suspension installed with Fuel rims and 37 Nitto Ridge Grapplers

Pardon my suspension ignorance....what is pintop? Just a name or something suspension specific?