Thanks Jimmy. So is adding the wire harness to the mirror still necessary if you dont want the lane control?
Sent from my iPad using Tapatalk
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Adding adaptive cruise
- Thread starter Bd2022Ram
- Start date
Thanks Jimmy. So is adding the wire harness to the mirror still necessary if you dont want the lane control?
Sent from my iPad using Tapatalk
Yes.
See my updated posts 22 & 23 for ACC ONLY install instructions, and post 40 for adding lane sense separately (but only if ACC was installed first).
dieselscout80
Well-Known Member
- Messages
- 1,068
- Reaction score
- 730
- Points
- 113
Jimmy do those instructions apply to all 2019 and newer Ram HDs in my case a 2020?
dieselscout80
Well-Known Member
- Messages
- 1,068
- Reaction score
- 730
- Points
- 113
Thanks!!
Refer to this thread, as it goes into more detail on removing it:
Audio Steering Controls Retrofit
Last part should be here Thursday. Hopefully I will be able to give this a go over the weekend. Happy to say, mission accomplished :) I now have working audio controls in the Tradesman. No programming necessary. The parts I listed in my prior post all appear to be working as expected. I took a...
hdrams.com
Got all of the parts in and swapped out the steering wheel control. Wasn’t difficult at all and took about 20 mins. Need to set up a windshield swap. Can anyone verify the part number for a ‘22 with ACC mount? Also, any suggestions on what to do with a perfectly fine windshield that has the auto high beam mount once it’s pulled out?
Here’s the parts list in this post:
Adding adaptive cruise
Anyways as the post says, has anyone added adaptive cruise to their trucks or is it just not worth the cost. I have a 2022 ram 2500 longhorn, awesome truck, but id like to add adaptive cruise if possible. It already has blind spot monitoring. Rain sense wipers, auto dim headlights and surround...
hdrams.com
Thanks again, it wouldn’t List that part as an option when I looked but shows compatible when I search by the part number. Have the windshield scheduled for tomorrow. Searching the forum, I believe the bypass cable has to connect behind the radio in my 22’ 2500. Any guide or pics on how to access or find the right cable location?
I forgot those on the parts list. They are 6509581AA.
M5x0.8 from the hardware store will do.
Gratsi'
Any guidance on how to find the SWG plugs for bypass? Maybe behind the cluster in the 2022 HD?
If you have the type of bypass block that replaces the gateway module, it is behind the cluster.
How would I be able to tell?
To tell which type of bypass you have? If it’s a block or OBD cable with 2 ports on it, like these below, you’ll need to remove the cluster to plug it in (gateway is on the dash frame tube):
If it’s an OBD port Tee harness style that plugs into the canbus blocks behind the headlight switch, you don’t need to remove the cluster:
Either style. It’s just more of a pain to hook up the one you have because the cluster needs to be removed.
***NOTE*** Since you are using that type of bypass, which involves disconnecting the security gateway module, you MUST remove that bypass and plug the security gateway module back in before you have the dealer calibrate.
You can’t use a mirror that has auto high beams (this function will be handled by the DASM). You either need a different mirror, or remove the auto high beam camera and cut its mounting box off.Something is off… do I also need a new rear view mirror?? The new DASM is in the way of where this camera sits (I’m guessing it’s the high/low beam control).
Sent from my iPhone using Tapatalk
