What did you do TO your RAM today?

[el_barto]

Installed the SumoSprings front bump stops. These should smooth out the bottom-out harshness offroad, and on road a bit too.

 

[newmason]

Finally getting around to post the upgrades.... 2020 Tradesman 17k miles as of now.... Installed new color matched door handles with passive entry, Amp Research running boards, Amp bed step, Amp bed step 2, Factory LED Headlights, Cooper Rugged Trek 275/75/18, I also have the factory LED fog lights and correct switche sitting in a box waiting for some time to get it installed.

Sent from my SM-N986U using Tapatalk

What did you have to do in order to get the passive entry to work? and what parts?

 

[Kldugas]

I ordered the kit from Nismopar and enabled with Alpha obd

Sent from my SM-N986U using Tapatalk

 

[Linked4door]

Installed my tonneau from my sold 2019 onto my new 2022 truck.

 

[DougB]

Can you post some clear, underneath photos of the side bed step showing where it mounted? I have 2 of these and when I looked at installing them on my mega cab, the lower control arm mount is right there so I am thinking these do NOT fit the mega cab. If they mount further forward it looks like they might interfere with the factory power steps. Not a big loss if I can't install them. Having the rear bedstep installed was way more important.

So I have been corrected by AMP tech support. The BedStep2 (75417-01A) fits 2022 megacab and does not interfere with the lower control arm mount near there as I had worried. They are also supposed to clear the plastic trim at the bottom edge of the bed just in front of the tire. I’ll give the installs a shot and see how they turn out.

 

[Linked4door]

Mounted my storage chest from my 2019 into the 2022. Used some riv uts in the bed floor so its easy to bolt in or unbolt. Also very hard for someone trying to steal it since its a rivnut they would have to cut off instead of just loosing a bolt. Plus two of them are hidden under a bed support so that would have to get cot off also.

 

[Linked4door]

Replaced my rear mark dodge mudflaps with a full set of black gatorback flaps. Also put some plugs i found at work into the front license plate holes

 

[RAM_Dad]

Replaced my rear mark dodge mudflaps with a full set of black gatorback flaps. Also put some plugs i found at work into the front license plate holes

You might be interested in color matched plugs.

Paint matched Bumper Plugs

I have your solution, much cheaper than $36 a set! I sell a bunch of them on the 5th Gen Ram page. I had a member of this page recommend I come over and provide my paint matched plugs here. I sell my plugs for $25 for a set of 4 or $15 for a set of 2. My plugs are prepped, primed, 3 coats of...

hdrams.com

 

[Dunn08]

Replaced my rear mark dodge mudflaps with a full set of black gatorback flaps. Also put some plugs i found at work into the front license plate holes

Great looking truck. Where’d you get the American flag decal for the rear center window?

 

[Linked4door]

Great looking truck. Where’d you get the American flag decal for the rear center window?

I got it on amazon, just be carefully some of them don't have the right number of stars for some stupid reason. Here is. Link to the one i ordered, but i am sure others will work also.

Amazon.com

 

[Dunn08]

I got it on amazon, just be carefully some of them don't have the right number of stars for some stupid reason. Here is. Link to the one i ordered, but i am sure others will work also.

Amazon.com

Right on, I appreciate it.

 

[newmason]

I got it on amazon, just be carefully some of them don't have the right number of stars for some stupid reason. Here is. Link to the one i ordered, but i am sure others will work also.

Amazon.com

Is that because they are printed in China? Just love seeing USA Flags, mech...etc. being made in China

 

[Linked4door]

Is that because they are printed in China? Just love seeing USA Flags, mech...etc. being made in China

Lmfao, thats exactly why. Couldn't find any that were actually made in the US.

 

[Brewbud]

I got it on amazon, just be carefully some of them don't have the right number of stars for some stupid reason. Here is. Link to the one i ordered, but i am sure others will work also.

Amazon.com

Some completely unrelated flag trivia, Most of the flags on the buildings at the Disney Parks have one less star on them. This is so they are not true American flags and they don't have to bring them down at night if the lights are turned off. The main flag they have near the entrance is a real flag. They pick a service member from the guests every day to take part in the flag-lowering ceremony every evening for the main flag.

 

[ACLdestroyer]

I learned that my rear axle is crooked today. And i have to take it in to the dealer with 500 miles to get fixed.

Its a good looking paperweight though.


Sent from my iPhone using Tapatalk

WTF? Axle is crooked? Any idea what caused it?

Good luck with the fix.

Also, we have the same truck. Mine is a 21' Patriot Blue Limited with Carli King 2.5 and Method NV 18"s and Toyo 37x12.5's. Had to add a 1" spacer to the rear after the carli kit to level it out.

 

[jadmt]

I just ordered them, still have about a week to go. I’ve owned Katzkin before they’re quality and a decent price. Front including middle seat and back for $1350 installed.


Sent from my iPhone using Tapatalk

So I got all excited and contacted Katzkin and asked who was a local installer and they determined that there was no installer in my area but there was 120 miles away. No problem so I asked who the installer 120 miles away was so I could check their work and reputation. Katzkin said they would not divulge that information until I placed the order including down payment..I said no thanks I needed to know who would be doing the work first and click....

 

[Darynt73]

So I got all excited and contacted Katzkin and asked who was a local installer and they determined that there was no installer in my area but there was 120 miles away. No problem so I asked who the installer 120 miles away was so I could check their work and reputation. Katzkin said they would not divulge that information until I placed the order including down payment..I said no thanks I needed to know who would be doing the work first and click....

That’s odd, when I ordered mine it went directly though the installer, Katzkin had nothing to do with my order, they just made it based on the order through the installer. The price was actually $350 less than estimated on Katzkin website. If you go on the Katzkin site and enter your zip code they will list the closest installer to you, then you can call and order through them.


Sent from my iPhone using Tapatalk

 

[Dave88LX]

Ripped the front end parts out from underneath!

 

[jadmt]

That’s odd, when I ordered mine it went directly though the installer, Katzkin had nothing to do with my order, they just made it based on the order through the installer. The price was actually $350 less than estimated on Katzkin website. If you go on the Katzkin site and enter your zip code they will list the closest installer to you, then you can call and order through them.


Sent from my iPhone using Tapatalk

when I do that it does not list any installers just says they have installers around a particular city. my zip is 59808

 

[scrambler1000]

20” light bar behind lower grille. Some were concerned the the grille would block the light.
My light bar is spilt flood on sides driving light center.