Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Rocks side to side

JWG34

New Member
Joined
Aug 20, 2022
Messages
8
Reaction score
1
I have a 2022 ram 2500 crew cab 6.4 4x4 with a service bed, I do mobile tire work and when I put around 8 tires in the back it starts rocking side to side at around 65-70mph also noticed it has coil springs on the rear, anyone know the best way to stop this side to side rocking?
 

JWG34

New Member
Joined
Aug 20, 2022
Messages
8
Reaction score
1
Is your load well balanced? Side to side? Front to back?
It is very balanced and even the way I stack them. If I put 2 more and one on top between them it rocks like crazy
 

Attachments

  • BDFC4DB0-7EE7-4455-9BDB-F03251BDA4D5.jpeg
    BDFC4DB0-7EE7-4455-9BDB-F03251BDA4D5.jpeg
    602.1 KB · Views: 17

Jnrcarson

Well-Known Member
Joined
Nov 28, 2021
Messages
244
Reaction score
422
I adde the Airlift 5000 to my truck, also added the onboard compressor. Compressor is nice but not a necessity. Airbags alone are quit affordable.
 

JWG34

New Member
Joined
Aug 20, 2022
Messages
8
Reaction score
1
I have a champion air compressor in my truck for my work could I use that? And are they easy enough to do myself?
 

Jnrcarson

Well-Known Member
Joined
Nov 28, 2021
Messages
244
Reaction score
422
Absolutely. Obviously you have mechanical abilities so you can do it no problem. Any air compressor works you just mount the valve stems in an accessible but protected location. I would supply each one individually so that there can’t be any air swap between bags which helps with side to side roll a little more.
 

flan

Well-Known Member
Joined
Aug 16, 2019
Messages
3,470
Reaction score
6,911
80psi in the rear tires?
 

Jnrcarson

Well-Known Member
Joined
Nov 28, 2021
Messages
244
Reaction score
422
Stock tires ? Not sure. I run 50 psi in my 35” Nittos and 60psi when towing.
 

JWG34

New Member
Joined
Aug 20, 2022
Messages
8
Reaction score
1
Yeah I thought it was weird, but it does it every time I get any weight in the back like the suspension isn’t very stiff at all
 

Crusty old shellback

Well-Known Member
Joined
Apr 10, 2021
Messages
2,951
Reaction score
4,582
Lower your tire pressure to around 50 to 55 when you are loaded.
75 is way too much. Look up the tires you have and see what the manufacture actually says to run. I run 45/37 in my 35" BFGs.
I've had the back loaded to the point the rear was sagging and still didnt have any issues and no swaying.
And mines a Power Wagon so even softer suspension.
 

H3LZSN1P3R

You're doing it wrong
Joined
May 29, 2020
Messages
9,165
Reaction score
8,313
You need air bags due to the fact the coils are so infar inboard
 

Toyotaguy

Active Member
Joined
May 8, 2021
Messages
103
Reaction score
165
Location
California
Our ram with a service bed had the same issue, we have a very consistent load on it so we went with the medium sumo springs and the problem is fixed.


Sent from my iPhone using Tapatalk
 

German1993

New Member
Joined
Jun 23, 2023
Messages
1
Reaction score
1
I have a 2022 ram 2500 crew cab 6.4 4x4 with a service bed, I do mobile tire work and when I put around 8 tires in the back it starts rocking side to side at around 65-70mph also noticed it has coil springs on the rear, anyone know the best way to stop this side to side rocking?
Hey I happen to have the same problem, I just purchased a 2022 ram 2500 6.4 with the schelzi service body and rack. I work in the pool industry and load rebar constantly and have the same exact issue my truck has to come down to 30mph to stabilize. I have replaced the tires from the cheap factory ones but no luck the spring and shock on its own doesn’t do the job, I’m looking into getting the bump stops replaced. These trucks should definitely not be coming off the lot like this. The swaying is so unsafe at speeds over 40. They should have made these trucks with leaf springs. Idk what they were thinking.
 

Users who are viewing this thread

Top