I just wanted to share this in case anybody found themselves in the same position I did. I recently added stock LED fog lights thanks to @Linked4door and he also included his bezels which had the provisions for the front park sensors. As soon as I knew I would have those bezels to play with, I started brainstorming ideas to make use of the holes for the park sensors as my truck doesn't have them. I could have simply ordered the bezels without park sensors, but that wouldn't have been any fun.
Anyways, I found these 1" hole plugs at Ace hardware that snapped in perfectly and then some 3/4" smoke lense amber LED marker lights. I used those to make some additional flashing lights to go along with the rest of my strobes on the truck for when I'm backing my trailer in off busy intersections and have to block traffic. Here's what I ended up with, and it was a fun project all together. Thanks again to @Linked4door !
Anyways, I found these 1" hole plugs at Ace hardware that snapped in perfectly and then some 3/4" smoke lense amber LED marker lights. I used those to make some additional flashing lights to go along with the rest of my strobes on the truck for when I'm backing my trailer in off busy intersections and have to block traffic. Here's what I ended up with, and it was a fun project all together. Thanks again to @Linked4door !