Steve_Cornell
Well-Known Member
I got all my auxiliary switches wired up today and labled.The switches control my front and rear LED lights, my Air Compressor, the Train Horns, and Flash the trailer lights.
I installed a Relay N.C. (normally closed) and the switch interrupts the power to the trailer clearance lights, I removed the trailer light fuse and installed the in & out to the relay to where the fuse was (I wired a 20 amp fuse inline to replace the fuse I removed)
I made my labels with a label maker with black tape \ white lettering, I got a couple a little crooked but I can always make more and replace them.
I think it turned out pretty good.
I installed a Relay N.C. (normally closed) and the switch interrupts the power to the trailer clearance lights, I removed the trailer light fuse and installed the in & out to the relay to where the fuse was (I wired a 20 amp fuse inline to replace the fuse I removed)
I made my labels with a label maker with black tape \ white lettering, I got a couple a little crooked but I can always make more and replace them.
I think it turned out pretty good.