Anyone running a 295/65/20 on stock suspension?

[robbyreneeward]

I’m not sold on leveling mine either. Depends on how it sits hooked up to my camper. A lift wouldn’t help the sway bar rub anyway. That’s due to wheel offset.

Duh of course lol. I don’t wanna run wheel spacers either and wanna run stock wheels.


Sent from my iPhone using Tapatalk

 

[Ramcat]

Duh of course lol. I don’t wanna run wheel spacers either and wanna run stock wheels.


Sent from my iPhone using Tapatalk

The rub really isn’t bad. Just a little at full lock. You almost can’t feel it. I’m just anal about stuff like that.

 

[dddoug]

295 65 20 Yoko Geolander X AT

Off road stock suspension NE.

How is the road noise compared to what you took off? I'm thinking the same. tire.

 

[SoldierOfTheLaw]

I can’t give an honest reply yet. My truck has 490 miles on it and the tires went on at 344.

Since install all trips have been local and short.

I’m planning to head up to hunting camp this weekend so I’ll get about 300 miles round trip with about 200 of those on the highway.

I’ll update this thread when I’m back.

 

[robbyreneeward]

I can’t give an honest reply yet. My truck has 490 miles on it and the tires went on at 344.

Since install all trips have been local and short.

I’m planning to head up to hunting camp this weekend so I’ll get about 300 miles round trip with about 200 of those on the highway.

I’ll update this thread when I’m back.

Thanks boss


Sent from my iPhone using Tapatalk

 

[Razzman]

Wondering if 285/65/20 May be a better option then?


Sent from my iPhone using Tapatalk

285/65R20 on mine and they rub the sway bar arm on one side. Nothing major just at full lock

 

[SoldierOfTheLaw]

Finally got out on the highway for a decent ride. Didn’t notice any tire noise. Windows up and cruised @75-80 up the PA turnpike and I-81.

Lie-o-meter showed 12.8 round trip with a bunch of short trips and driving in the fields.

Sounds about right considering I’ve got less than 900 miles.

 

[Ostracize]

As others have said, slight rub at lock but no biggie.

 

[Brutal_HO]

285/65R20 on mine and they rub the sway bar arm on one side. Nothing major just at full lock

Mine do not rub at all.

Falken Wildpeak AT3/W 285/65R20.

 

[Razzman]

Mine do not rub at all.

Falken Wildpeak AT3/W 285/65R20.

I noticed the front axle offset is to the right side which of course is where it rubs on the Thuren sway bar. Wish they'd quit offsetting the axle.

 

[Brutal_HO]

I noticed the front axle offset is to the right side which of course is where it rubs on the Thuren sway bar. Wish they'd quit offsetting the axle.

Ah, you didn't say Thuren in the first reply.

That offset is a function of the track bar at ride height and it's going to shift around so a little extra clearance is needed. With a solid axle on coils, the only way to avoid that is to convert to a 4 link.

 

[Innoi]

295 65 20 Yoko Geolander X AT

Off road stock suspension NE.

Do they rub?

 

[Toyotaguy]

Got my 295/65r20 on today. Went with Yokohama x-at
It runs just barley at full lock, I can’t even feel the rub I just hear it.


Sent from my iPhone using Tapatalk

 

[Innoi]

Got my 295/65r20 on today. Went with Yokohama x-at
It runs just barley at full lock, I can’t even feel the rub I just hear it.


Sent from my iPhone using Tapatalk

I second that!!

 

[Arth]

Hoping to get my 295/65/20 Nitto Recons this week. Running Thuren springs front and rear with their sway bar so I don't believe I'll have any rub...

 

[G Mcpherson]

I have 285-65-20 Cooper AT3. Thuren Front Coils at 1.75". Thuren Sway Bar. Slight Rub on the Right side Radius Arm.

 

[Toyotaguy]

What psi are you guys running your tires at? I ran my firestones at 55 front 50 rear.

I set the Yokohamas up the same way and the front seemed a little low visually so I bumped them up to 60.


Sent from my iPhone using Tapatalk

 

[tkbenziger]

I just installed 35x11.5x20 Nitto Recon Grapplers on my NE wheels and they fit great with stock suspension - no rub.

Did the exact same today but also did Thuren High Clearance Sway bar. Full lock, no rub

 

[Arth]

Ended up with Nitto Recon ATs. No issues. Running high clearance sway bar.

 

[G Mcpherson]

Nothing on the Radius Arms?