20 Laramie 2500 6.4l "overland" build

[NHOverland]

Hello all,

Austin here, building my adventure rig. To start, it is a 2020 2500 Laramie crew cab 6.4l Diamond Black Crystal Pearlcoat Midnight. Any questions on parts or installs feel free to ask.

 

[NHOverland]

Bilstein 5162s all the way around
Thruen Fab 2" Hemi leveling springs
Carli Adjustable Track Bar
Carli Steering stabilizer
Carli Swaybay (on the way)
CJC Offroad resi mounts and rear lower resi guards

 

[Squatch]

How do you like the 5162s?

 

[NHOverland]

How do you like the 5162s?

So far so good.

 

[Brutal_HO]

That's badass that you got it up on that curb without lifting a tire.

LOL, j/k. Welcome!

 

[NHOverland]

That's badass that you got it up on that curb without lifting a tire.

LOL, j/k. Welcome!

5-1/2" curb was a challenge! All the McDonald's employees camp out to watch me conquer it! Lol

 

[NHOverland]

Installed a Switch-Pros 9100s to run all the things! Custom mounting bracket for module, mounted the switch panel where I was lacking the wireless charger, and used a daystar firewall boot through the block off plate.

 

[jsalbre]

Nice work, looks nearly factory.

 

[DontSlamMyRam]

I have the same wheels as you. I see those center caps were a joke for you too?

 

[NHOverland]

Yes they were. I'm on set 4, first were ruined by townfair tire, 2nd set lost 3 on the highway, 2 lost off road, and the 4th set in the garage. Wheel Pros replaced each set, but I have not heard back from Fuel after suggesting their China wheels need an update.

 

[DontSlamMyRam]

I ended up removing the rear springs/ret rings and just tapping the caps in till they were snug between the floater flange and wheel. For the cost you would have thought someone could have engineered something more robust. My wheels got lost in ups land for three weeks, then arrived damaged. It was two months of suffering from Fuel/MHT and XDP. After your story I really wish I would have sent it all back! Sorry, rant..
Truck Looks Sick!!

 

[NHOverland]

So a lot of things have happened to the truck since the last post... I have been slacking. Lol will be working on some catching up.

 

[Shadowboxin20]

Where did you mount the panel for the switch pro?

 

[NHOverland]

Where did you mount the panel for the switch pro?

 

[UglyViking]

Man, I was gonna mount mine there but I've got that charging pad that I've grown quite fond of. I may check clearance and see if I can mount it on the pass side. Hard to install or pretty straight forward?

 

[NHOverland]

Man, I was gonna mount mine there but I've got that charging pad that I've grown quite fond of. I may check clearance and see if I can mount it on the pass side. Hard to install or pretty straight forward?

It wasn't bad, it is double layered with plastic and the outside rubber. measure 3 times cut once! lol

 

[NHOverland]

Under hood lights help to see in the dark.

Under Hood Light Kit < available here!

 

[NHOverland]

Gone from having the ARB Twin Compressor to an Auxiliary Battery.

 

[NHOverland]

https://www.nhoverland.com/products/ram-compressor-mount
https://www.nhoverland.com/products/auxiliary-battery-mount

 

[UglyViking]

Where you planning to mount the ARB?