Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
A 2022 UC5 Radio and Screen (requires nothing specific in ALFa)
A 2022 CVPM - This requires you to reconfigure your BCM‘s MODEL Year in AlfaOBD to match It. That’s why you’re getting a mismatch code.
A 2022 UC5 Radio and Screen (requires nothing specific in ALFa)
A 2022 CVPM - This requires you to reconfigure your BCM‘s MODEL Year in AlfaOBD to match It. That’s why you’re getting a mismatch code.
I’ll add a picture of the setting - but it’s under BCM - Car Configuration Change - then choose the 2022 model year, and then go clear codes on the CVPM and calibrate…
I connect to Body Computer, MY2022+ PowerNet, and I get back “connected to body control module continental MY2020”. I head over to car configuration change. Model year I set to 2022. Get it to where it says : Current Status of Component: 22
I’ll try and calibrate tomorrow when the sun is back out.
I connect to Body Computer, MY2022+ PowerNet, and I get back “connected to body control module continental MY2020”. I head over to car configuration change. Model year I set to 2022. Get it to where it says : Current Status of Component: 22
I’ll try and calibrate tomorrow when the sun is back out.
What I found worked the best - Clear CVPM codes from Status page, then do one of the side cameras, "disconnect, then reconnect to the Radio-CVPM" clear code, other side camera.. then same dance to Front, then rear...