Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Your instructions were right on. Other than the quirky workarounds needed for the ‘22 UC5, mine has been working great since installation. Thanks for putting in the effort to finally resolve this “range” issue.
This continues to be reported by ‘22 UConnect5 owners. The doc for the latest patch 26.17 acknowledged this bug - but didn’t resolve it. Since 2019, none of the TTPMS systems have worked reliably…
Just returned from a 1,700 mile camping trip - trying out the Tow Mode camera.
Using @Webracin solution, I relocated the connector to the bed wall. The Tow Mode camera was completely stable and sharp throughout the trip - including many hook-ups and unhooks along the way.
My trailer is a 40'...
Until the last update 24.17, you could not set the trailer tire pressure target. It would keep returning to “409”.
Then, when you registered the trailer tires, they would all display normally until you shut the truck off. Upon restarting, you would get the message “Trailer Tire System Not...
Seems like the update fixed the UC5 erasing (or not saving) of the TTPMS configuration issue on the 2022s. Won’t know for sure until it starts to warm up out there.
Now, if only they would get to the Trailering Nav function and the Diesel location/pricing on the Maps…
That should work. The important thing that you solved is proving it’s a range issue and that you can disconnect/reconnect without wiping the config.
BTW, when disconnected and you get the “not configured” error, do you just leave it and the config comes back after you reconnect… or do you do...
Amazing list of basic complaints in RAM’s own documentation. Takes months for a firmware update that ends up addressing few issues. Then breaks other functions. It’s the Keystone Cops playing Whack-A-Mole at UConnect. How embarrassing. How about testing before you release the firmware. And think...
The 26.17 update on my ‘22 Limited suddenly gives me a radio button for “Towing Nav” on my Trailer Page where you configure the TTPMS. I read that Towing Nav version was part of the ‘23 config. When I press it , it says Trailer Nav at the top of the screen - but the screen stays white - like...
I just successfully did mine. Make sure you formatted with NTFS and didn’t unzip before insertion. My USB was 2.0 for compatibility. Inserted it in USB at front of console. Took about an hour to update. Very slow between 40 and 54% but it keeps going.
I can't get this download to work. Google says "Quota exceeded". Tried all different times.
Is the link broken or am I just "late to the party" and should just keep trying?
Anyone else have this problem?