Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I’m still here. I don’t recall seeing a message from you but happy to help. I don’t have the 23 updated camera housing designed and built yet but it’s in the works.
On the 22s the advantage of plugging in to the back of the bumper fakra cable is the rear view mirror then acts as if it’s attached to a trailer giving you better adjustability to aim the camera up down left right. Those adjustments go away when you run a cable from the cable inside the cab...
You don’t tap into anything on the 3rd brake light on a 22. You simply disconnect the cable behind the bumper connection and plug in a fakra extension and run to your camera on your topper. The cable that connects to the bumper housing is already equipped with an o-ring and will perform fine as is.
ARE topper is easy. You will just have to unplug cable from your 3rd brake light and run an extension under your truck to the topper through bed post hole. You can either drill through the topper under the housing or pop off the 3rd brake light on the topper and run the cable through the light...
My seats on my 22 limited 3500 are super stiff. I have a slight disc issue and i notice i am constantly adjusting my positions as my butt cheeks go numb. We have a few other vehicles and this is the only one that makes my butt go numb after a while.