What did you do TO your RAM today?

[TYW]

A couple more....
View attachment 63297
View attachment 63298
View attachment 63299

This flatbed is clean, eventually I wanna do a bed just like that some day.

 

[GatorNation]

After the 35s, I corrected the tire size and changed air threshold using AlfaOBD.

 

[BadKarma]

With the ranch hand. Probably going to end up with a full bumper swap to something with a winch.

 

[clownpocket]

Over the Christmas break, I installed the Baja Designs fog light kit, S8 20" light bar, and LED lights for the bed (wired off the stock LED bed lights). Easy install!

The second photo shows the difference between the stock fog light on the left and the Baja Designs on the right. Big difference!

 

[NC Rebel]

Added the Vice Design hidden winch mount with a Badlands Apex 12K winch. So far everything works great ! Took about 4 hours doing this myself without removing the front bumper.

 

[4FishLimit]

Took advantage of the unseasonably warm weather this past weekend and rolled in a bedliner as my truck didn’t come with a factory one. A custom color spray in job around me is right about $1K OTD.

I went the DIY route used Monstaliner in a color called D.O.A., which is a fairly light grey. It’s definitely not for everyone but I’m liking the look so far. Will be nice not to get burned by a black liner in the summer.

 

[jsalbre]

Took advantage of the unseasonably warm weather this past weekend and rolled in a bedliner as my truck didn’t come with a factory one. A custom color spray in job around me is right about $1K OTD.

I went the DIY route used Monstaliner in a color called D.O.A., which is a fairly light grey. It’s definitely not for everyone but I’m liking the look so far. Will be nice not to get burned by a black liner in the summer.

That’s a unique look, but I like it! Nice work.

 

[SpeyRam]

Took advantage of the unseasonably warm weather this past weekend and rolled in a bedliner as my truck didn’t come with a factory one. A custom color spray in job around me is right about $1K OTD.

I went the DIY route used Monstaliner in a color called D.O.A., which is a fairly light grey. It’s definitely not for everyone but I’m liking the look so far. Will be nice not to get burned by a black liner in the summer.

Yeah, nicely done. Impressed by how good this looks.

 

[4FishLimit]

Yeah, nicely done. Impressed by how good this looks.

Thank you!

 

[4FishLimit]

That’s a unique look, but I like it! Nice work.

Thanks!

Wasn’t a bad way to kill a weekend in the garage.

 

[GatorNation]

Added some light when in reverse by adding a license plate kit from Feniex. Two T3s put out some lumens.

 

[Lonestar]

Added the Vice Design hidden winch mount with a Badlands Apex 12K winch. So far everything works great ! Took about 4 hours doing this myself without removing the front bumper.

Looks great! This has definitely been on my to do list

 

[NC Rebel]

Looks great! This has definitely been on my to do list

Thanks , and I was too decided to go ahead and pull the trigger .

 

[Lonestar]

Thanks , and I was too decided to go ahead and pull the trigger .

With the badlands winch were you able to relocate the clutch for easy access?

 

[NC Rebel]

With the badlands winch were you able to relocate the clutch for easy access?

Not with the badlands but its not too difficult to access where it's at.

 

[Lonestar]

Not with the badlands but its not too difficult to access where it's at.

When you get a chance would you mind posting a pic of where the clutch is?

 

[Grateful Dad]

New truck didn’t have steps so I procured the factory chrome steps off the Tradesman I traded. Since the new truck is a night edition the chrome wasn’t going to cut it so I had them shot with Bullet Liner. Hope to have them installed tomorrow, had to swing by the parts counter on the way home from work to grab the mounting hardware. More pics to come.

 

[GatorNation]

Steps look amazing!! Wish mine had that finish.

 

[Grateful Dad]

Steps look amazing!! Wish mine had that finish.

They look even better in person, iPhone pic does them no justice. You can see the RAM lettering clear as day on the plastic piece they shot over.

 

[Grateful Dad]

Added some light when in reverse by adding a license plate kit from Feniex. Two T3s put out some lumens.

View attachment 67420View attachment 67421

We gonna get some night shots? Those look nice!