I would like to replace the oem flip style mirror that came on my '22 Tradesman. Everything I'm finding for aftermarket options is the digital style mirror. Anyone have a link or experience with just an auto dimming rear view mirror?
Nope, it needs the linbus circuit to function, and AlfaOBD needs to change the BCM settings to make it work.Awesome, thanks for the part numbers. Could a guy just wire this to a switched power source and not spend the $60 on the wiring harness and needing AlfaOBD? I don't have AlfaOBD and the cost for that and harness is more than the mirror.
What are the settings that need changed?Nope, it needs the linbus circuit to function, and AlfaOBD needs to change the BCM settings to make it work.
Auto Dim Mirror:What are the settings that need changed?
Does the auto highbeam have a special windshield required for the sensor? Or will the standard windshield work?Auto Dim Mirror:
VehConfig 3: Interior Electrochromic Mirror Present- YES
LIN & Misc- CRVMM Present- YES
Auto High Beam- above settings plus:
VehConfig 1: Auto Highbeam- YES
2014 CBC Config I/O & Feat.: Auto High Beam Module Location- CRVMM
CustSetMenu 1: Auto High Beam CSM Present- YES
No, standard windshield is fine for auto highbeam.Does the auto highbeam have a special windshield required for the sensor? Or will the standard windshield work?
I just installed the mirror with both auto high beam and auto dimming that you listed here, I already had the auto dimming mirror without auto high beam. My existing wiring and mirror covers were ok and the cover already had the cutout for the high beam camera. I am real happy with this new mirror, the dimming area is bigger and seams to work much better than my original mirror. Its isn't dark enough yet to see if high beam comes on, will be testing later and let you know.**I Edited my post above**
I don’t think the covers I posted have the hole for the auto high beam camera, so I’m trying to double check that. I’ll re-post the correct covers for both types of mirrors when I figure that out.
Auto high beam works, but it seems not to be sensitive enough. Twice after a vehicle coming at me the headlights dimmed but then a couple of seconds later went high making the other vehicle flash their brights at me. Whish there was a way to adjust sensitivity.I just installed the mirror with both auto high beam and auto dimming that you listed here, I already had the auto dimming mirror without auto high beam. My existing wiring and mirror covers were ok and the cover already had the cutout for the high beam camera. I am real happy with this new mirror, the dimming area is bigger and seams to work much better than my original mirror. Its isn't dark enough yet to see if high beam comes on, will be testing later and let you know.
Got the mirror on Ebay for $150