What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Aftermarket Off-Road Lighting Thread

I adjusted the lights to get them to have a better beam pattern. I hope the photos show it. I was on a dead end roadway that does not see hardly any traffic so no worries about on coming traffic. I initially adjusted them in an old airforce bunker area. Let me know what you guys think.
1000001548.jpg
All pod lights on with no headlights or fog lights on. Initial adjustment.
1000001549.jpg
Low beam headlights.
1000001550.jpg
High beam headlights
1000001551.jpg
Center spot lights only. No headlights or fog lights on.
1000001552.jpg
All pod lights on. No headlights or fog lights on.
 
Nothing over the top. Fogs are Baja and grill guard lights are KC’s that I will be upgrading to the led versions. Came on here to peep some rear set ups for when I’m in the woods and camping and need a little more illumination, outback
 

Attachments

  • IMG_5923.jpeg
    IMG_5923.jpeg
    1.2 MB · Views: 25
  • IMG_6443.jpeg
    IMG_6443.jpeg
    1.2 MB · Views: 25
Dinky503 said:
It's ProTech, if you find a dealer in your area you can order it a few different ways.
Click to expand...
thanks buddy, ill see what i can find.

edit - found a place that is a protech dealer up the road. ill have to stop by and see what they got or can do.
 
oledirteh said:
thanks buddy, ill see what i can find.

edit - found a place that is a protech dealer up the road. ill have to stop by and see what they got or can do.
Click to expand...

Depends on what you want they have one that is 2in over cab or flush in height. I ran my wires for light in the tube and made it come out the front bed pocket and wires under bed to cab. They also make a rear hoop so you can haul long stuff.
20220201_170827.jpg20220212_112543.jpg
 
Dinky503 said:
Depends on what you want they have one that is 2in over cab or flush in height. I ran my wires for light in the tube and made it come out the front bed pocket and wires under bed to cab. They also make a rear hoop so you can haul long stuff.
View attachment 79697View attachment 79698
Click to expand...


yea that would be sweet for loading the quad and some kayaks! and still have the toy hauler behind me lol
 
oledirteh said:
yea that would be sweet for loading the quad and some kayaks! and still have the toy hauler behind me lol
Click to expand...

Yeah it does work great for that. It wasn't cheap it was like $1,300 for both so not outrageous but a hit. Comparable to other brands but this one is stout Commercial grade. Make sure they double check height of cab before they order. They ordered mine wrong twice lmao.
 
Dinky503 said:
Yeah it does work great for that. It wasn't cheap it was like $1,300 for both so not outrageous but a hit. Comparable to other brands but this one is stout Commercial grade. Make sure they double check height of cab before they order. They ordered mine wrong twice lmao.
Click to expand...
LOL whoops.

id want it no taller then say where the cab lights would be. cause my cab lights are close enough in parking garages that i drive with my eyes closed.
 
oledirteh said:
LOL whoops.

id want it no taller then say where the cab lights would be. cause my cab lights are close enough in parking garages that i drive with my eyes closed.
Click to expand...

mine is max height for car washes and parking garages were no go a long time ago lol. I do have the ears in place on top of the rack to stop stuff from falling off the edge of rack. Sounds like you will definitely double check measurements.
 
Looking to add some A-pillar lights, what is everyone using? Also, what light pattern are they?
 
You must log in or register to reply here.
Back
Top