What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Aftermarket Off-Road Lighting Thread

Dinky503 said:
I've delt



I have bought from them before. They are like many that do not keep inventory and just drop ship from manufacturer.

Those lights will be awesome.
Click to expand...
I just talk to them and they manufacturer the brackets in house, so I am going to give them a go. A bit expensive but you get what you pay for.
 
T
Lonestar said:
sdhqoffroad.com

'19-26 Ram 2500/3500 SDHQ Built A-Pillar Light Mounts

Our SDHQ Built A-Pillar Light Mounts for the 2019-Current Ram 2500 and 3500 are the best fitting, highest quality a-pillar mounts on the market. SDHQ-31-1206-G5
sdhqoffroad.com sdhqoffroad.com

The mounts I bought were almost as much as the lights :p
Click to expand...
those look awesome. I would like to see how much those are visible from the driver seat / how much effect they have on visibility out the a pillar
 
I've bought from them as well.
Dan, another Baja race support guy, works for them. He hung out at our pit 1 race.
Hooked me up with their prototype .ount for putting pods in the rear bumper. Worked great. Gave him some feedback on them.
He wasn't sure if they were going to sell them, or just use them for in house installs
 
FYI. Oncoming traffic hates those. Please be considerate of other drivers.
Unfortunately, that doesn’t happen where I live.
 
Has anyone found a mount where we could place 2 cube lights (i.e. BD Squadrons, Rigid D-Series, Morimoto 4-bangers) in the lower center grille? I am currently running BD Squadron SAE with yellow lenses in the factory fog pockets. I'm not a huge fan of the light distribution and the way lights come on with turn signal and turning. Ideally, I want to put clear lenses in the fog lights and install a pair of Squadrons with factory amber lights in the lower center grille. I just can not find any good mounts. Any suggestions?
 
Elite130 said:
Has anyone found a mount where we could place 2 cube lights (i.e. BD Squadrons, Rigid D-Series, Morimoto 4-bangers) in the lower center grille? I am currently running BD Squadron SAE with yellow lenses in the factory fog pockets. I'm not a huge fan of the light distribution and the way lights come on with turn signal and turning. Ideally, I want to put clear lenses in the fog lights and install a pair of Squadrons with factory amber lights in the lower center grille. I just can not find any good mounts. Any suggestions?
Click to expand...
This is for a 1500 and currently OOS. I know I have seen others.

sktcustoms.com

2019-2024 Ram 1500 DT Lower Grille + LED Mount Kit

THE WAIT IS ALMOST OVER! GRILLE KITS WILL BE IN STOCK SOON! Frankly, it's kind of embarrassing how long we've been out of stock with these grille kits, and we're truly sorry for the wait. We've received hundreds and hundreds of emails, DMs, and comments asking about the grille kits - and it is...
sktcustoms.com
 
Last edited:
I'd really like something like this for mine. But no one seems to make the mount for the 4.5 gen's. If anyone knows where to find this let me know.

1755102944067.png
 
McHenry2500 said:
I'd really like something like this for mine. But no one seems to make the mount for the 4.5 gen's. If anyone knows where to find this let me know.

View attachment 88636
Click to expand...
I’ve always wondered why the Baja Design product linked to below wouldn’t work on the 4.5 gen HD as the factory fog lights look to be the same.

www.bajadesigns.com

RAM Dual S2 SAE Fog Pocket Light Kit - RAM 2019-24 1500 Rebel; 2021-24 1500 TRX - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike

The Ram 1500 Rebel and TRX '19-22 are great platforms that deserves an equally great light kit. That’s why we are proud to offer the new S2 SAE fog pocket light kit specifically designed for these RAM trucks. ...
www.bajadesigns.com www.bajadesigns.com
 
mandronline.com

2019-2024 RAM 2500/3500 HD Lower Grille Light Pods

Fits RAM 2500/3500, years 2019 2020 2021 2022 2023 2024 Choose either 2 or 4 LED light pods No cutting or drilling required. The kit is a complete bolt on using factory openings and hardware. Don't need to remove grille or bumper as it reuses bolts behind the lower grille Doesn't interfere with...
mandronline.com mandronline.com
 
Elite130 said:
Has anyone found a mount where we could place 2 cube lights (i.e. BD Squadrons, Rigid D-Series, Morimoto 4-bangers) in the lower center grille? I am currently running BD Squadron SAE with yellow lenses in the factory fog pockets. I'm not a huge fan of the light distribution and the way lights come on with turn signal and turning. Ideally, I want to put clear lenses in the fog lights and install a pair of Squadrons with factory amber lights in the lower center grille. I just can not find any good mounts. Any suggestions?
Click to expand...
I found a spot

image.jpg
 
Elite130 said:
Has anyone found a mount where we could place 2 cube lights (i.e. BD Squadrons, Rigid D-Series, Morimoto 4-bangers) in the lower center grille? I am currently running BD Squadron SAE with yellow lenses in the factory fog pockets. I'm not a huge fan of the light distribution and the way lights come on with turn signal and turning. Ideally, I want to put clear lenses in the fog lights and install a pair of Squadrons with factory amber lights in the lower center grille. I just can not find any good mounts. Any suggestions?
Click to expand...
Here you go

www.cjcoffroad.com

CJC Built 2019-2025 5th Gen Ram 2500/3500 Front Bumper Light Cradle System

This light system allows you to mount four lights of your choosing on a 2019+ Ram 2500/3500 trucks. This is a bolt on option perfect for people that want more control of light and more total light output than a 20" bar will allow in the same location.
www.cjcoffroad.com www.cjcoffroad.com
 
Elite130 said:
Has anyone found a mount where we could place 2 cube lights (i.e. BD Squadrons, Rigid D-Series, Morimoto 4-bangers) in the lower center grille? I am currently running BD Squadron SAE with yellow lenses in the factory fog pockets. I'm not a huge fan of the light distribution and the way lights come on with turn signal and turning. Ideally, I want to put clear lenses in the fog lights and install a pair of Squadrons with factory amber lights in the lower center grille. I just can not find any good mounts. Any suggestions?
Click to expand...



There are plenty of options out there. Have you tried changing the lens for another pattern? I made the brackets for all lights in the photos.20221223_104844.jpg20230128_082042.jpg20230128_104928.jpg20230128_104713.jpg20230128_112214.jpg20230331_141000.jpg20231020_155617.jpg
 
Finally got around to adding the rear under light but don’t like where I put it. I will be adjusting these after a I add the ditch lights now that the brackets came in.

IMG_1562.jpeg
 
You must log in or register to reply here.
Back
Top