Redfour5
Well-Known Member
- Messages
- 400
- Reaction score
- 319
- Points
- 63
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Post Pics of your 2019+ 2500 or 3500!
- Thread starter The HOFF
- Start date
Redfour5
Well-Known Member
- Messages
- 400
- Reaction score
- 319
- Points
- 63
First pic was how the truck was and the rest are the new look. Still at the dealership hopefully will pick up tomorrow.
Added Carli torsion sway bar and upper and lower stabilizer. Also foundation wheels on 37’s. Crazy how 35’s used to look so big and once I installed them they looked tiny to me. Hoping the 37’s will be it
Added Carli torsion sway bar and upper and lower stabilizer. Also foundation wheels on 37’s. Crazy how 35’s used to look so big and once I installed them they looked tiny to me. Hoping the 37’s will be it
Attachments
motorhead426
Well-Known Member
I have a hectic day so trying to get done to get there to pick it up. I will let you know once I get it though. CJC said they shouldn’t rub but we shall see. Or hear.
azrwilkinson
Member
- Messages
- 45
- Reaction score
- 35
- Points
- 18
Cinders OHV area?
Arth
Active Member
- Messages
- 127
- Reaction score
- 175
- Points
- 43
Don't worry I can still get to the beer fridge!
After some paint correction I added painted to match vent visors. Still some more minor corrections but its almost time to get back to work.
After some paint correction I added painted to match vent visors. Still some more minor corrections but its almost time to get back to work.
Those visors look great, did you buys those that way or paint them yourself?
Rockcrawlindude
a rock crawlin’ dude
Arth
Active Member
- Messages
- 127
- Reaction score
- 175
- Points
- 43
Bought them direct from a vendor. Not perfect but look good still. In the sun light you can see the shade difference but still looks good to me.
Bobalou
New Member
By chance have a link for them?
Bobalou
New Member
I recently picked up a 22, all stock. Added N-fab bars, rear bumper step, a gator tri fold cove, and bed mat, and got the windows tinted.
PGHChris81
Well-Known Member
Burgh Represent!
Ok so a little update. Truck is still at the dealer. I was having an issue with the def system so they had to order a new tank which caused some delays.
The tires do rub on the fender liner quite a bit. They are going to trim it and should be good to go. I’m running a +19 offset as I didn’t want too much poke considering my truck didn’t come with flares. I think if you have flares and go with a 0 offset you might be fine
Also fwiw when I first asked about speedo calibration for bigger tires I was told no one offered anything for 25’s. If you are wanting to go bigger tires but this is stopping you talk to your dealer. Mine did it for $150. First time on 35’a and now for the 37’s. Hope that helps
Finally picked it up and got a chance to take some pics. Drives way better now with the Carli torsion sway bay. Fender liners needed to be trimmed about 4 inches on the back sides and pinch welds had to be also. Dealership took care of it all for me as there was no way I was going to drive home with how bad it sounded.
Attachments
Rockcrawlindude
a rock crawlin’ dude
G Mcpherson
Well-Known Member
Now we need a Photo of the New Ram. With the New Headlights.