Inside LED Light Bars

[B Mac]

Anyone familiar with either OEM or RR, etc that makes these for a 2500?

Thx in advance

 

[MtnRider]

Makes what? There is just a picture of a jeep in your post.


.

 

[NC Rebel]

He has a lightbar on the inside of the jeep, you can sort of see it in the pic.

 

[B Mac]

Makes what? There is just a picture of a jeep in your post.


.

My bad...inside LED light bars

 

[el_barto]

I have feniex fusion bar in my truck. Haven’t fully wired it up yet, and also need to figure out how to reduce light splash-back.
Make sure to pick the 2010-2018 brackets not the 2019+ brackets. You may have to modify things if you have the large ACC module behind the mirror (my truck does not).
The majority of my intent for this light bar is offroad/scene lighting…light output is pretty good, but honestly not as good as I’d hoped.

 

[B Mac]

I have feniex fusion bar in my truck. Haven’t fully wired it up yet, and also need to figure out how to reduce light splash-back.
Make sure to pick the 2010-2018 brackets not the 2019+ brackets. You may have to modify things if you have the large ACC module behind the mirror (my truck does not).
The majority of my intent for this light bar is offroad/scene lighting…light output is pretty good, but honestly not as good as I’d hoped.

Great pics and TY...look good from the inside and out

 

[Brewbud]

I have feniex fusion bar in my truck. Haven’t fully wired it up yet, and also need to figure out how to reduce light splash-back.
Make sure to pick the 2010-2018 brackets not the 2019+ brackets. You may have to modify things if you have the large ACC module behind the mirror (my truck does not).
The majority of my intent for this light bar is offroad/scene lighting…light output is pretty good, but honestly not as good as I’d hoped.

Do these lights not sit 100% flush against the inside of the window?

 

[el_barto]

Do these lights not sit 100% flush against the inside of the window?

No the brackets are Ram specific but the main housing is a generic curve. It’s close but not a perfect seal. Lots of light splash until I find a good way to seal it. Maybe 1/4” gap. Tried a couple garage door seals but they didn’t stick well.

 

[farmallboy]

I have feniex fusion bar in my truck. Haven’t fully wired it up yet, and also need to figure out how to reduce light splash-back.
Make sure to pick the 2010-2018 brackets not the 2019+ brackets. You may have to modify things if you have the large ACC module behind the mirror (my truck does not).
The majority of my intent for this light bar is offroad/scene lighting…light output is pretty good, but honestly not as good as I’d hoped.

I’m not sure on how functional they are and can’t debate it. But those look SWEET with your LED accent headlights

 

[Eatonpcat]

But those look SWEET

Agree... @el_barto please let us know what you find to seal the gaps.

 

[H3LZSN1P3R]

No the brackets are Ram specific but the main housing is a generic curve. It’s close but not a perfect seal. Lots of light splash until I find a good way to seal it. Maybe 1/4” gap. Tried a couple garage door seals but they didn’t stick well.

This on the edge of the light shield would work id imagine

 

[el_barto]

It has a bit of weatherstripping/vinyl edging like that but it doesn’t reach the windshield across the whole edge. Hard to show in a picture…

 

[B Mac]

It's not an interior windshield light bar, but Headlight Revolution makes a behind the lower grill light bar I'm ging to pull the trigger on...part #448031... Safe Travels

 

[Brewbud]

It's not an interior windshield light bar, but Headlight Revolution makes a behind the lower grill light bar I'm ging to pull the trigger on...part #448031... Safe Travels

Baja Designs does too. Probably the way I will go eventually.

Baja Designs Dodge, Ram 2500/3500 (19-On), 20

S8 Lumens: 19,050 Utilizing 16 Cree LEDs OnX6+ Lumens: (High) 24,920 (Low) 18,460 Utilizing 12 Cree LEDs Looking for the ultimate lighting kit for your HD Ram? Look no further! The 20" OnX6+ kit is the kit for you, it includes everything you need, the light, wiring harness, and mounts. his kit...

www.cjcoffroad.com

 

[H3LZSN1P3R]

It has a bit of weatherstripping/vinyl edging like that but it doesn’t reach the windshield across the whole edge. Hard to show in a picture…
View attachment 23519

Thats why this one is better it has foam on the end to fill the gaps unlike the normal edging

 

[el_barto]

Thats why this one is better it has foam on the end to fill the gaps unlike the normal edging

Gotcha, I didn’t look that close initially.
McMaster has a few options I could try out…. That bulb type you posted or maybe a “wiper” type they have ….

Thanks

 

[H3LZSN1P3R]

Gotcha, I didn’t look that close initially.
McMaster has a few options I could try out…. That bulb type you posted or maybe a “wiper” type they have ….

Thanks

The wiper may be a bit much but would forsure work

 

[el_barto]

The wiper may be a bit much but would forsure work

Maybe…looking at it this afternoon there’s a fair bit of gap (about 1 finger) near the center of the windshield.