Getting AEV Saltas on 35s installed on my 2020 Ram 2500 without lift or level today

[Lakanen77]

Have you had any desire to. Put on a leveling kit after having the larger tires on for a while?

 

[jadmt]

Have you had any desire to. Put on a leveling kit after having the larger tires on for a while?

I have not. I think mine is pretty level and I like a bit of rake anyway.

 

[Lakanen77]

Well so far so good. Fits perfect in my opinion. No rubbing at all. Looks factory!

I have the same truck and am wondering if you have any desire to put on a leveling kit after you have had it that way for a while. The AEV wheels seem to take care of the backspacing from what I can gather. Do yo have any rubbing at all with full lock or under flex? Thanks!

 

[nshirvanian]

I have the same truck and am wondering if you have any desire to put on a leveling kit after you have had it that way for a while. The AEV wheels seem to take care of the backspacing from what I can gather. Do yo have any rubbing at all with full lock or under flex? Thanks!

Zero. Perfect fitment.

 

[sstoner911]

The trick to rub or no rub comes down to the offset of the wheel. If you keep the stock wheels or get aftermarket wheels with the same factory offset it will not rub.

 

[delmonicodiesel69]

35" Nittos. No lift, no level, and no rub. AEV SNAP to adjust TPMS and tire size.
View attachment 11689

Are those 35x12.5 or 35x13.5?

 

[delmonicodiesel69]

Trucks looks great sir

No rub here on 285/75-18 which are larger in diameter than 35x12.50s by about an inch depending on brand

calibrated with aev procal snap

Which brand?

 

[Rockcrawlindude]

Which brand?

I have nitto ridge grapplers if that’s what you were asking, sir

 

[delmonicodiesel69]

I have nitto ridge grapplers if that’s what you were asking, sir

Yes, thank you. Just trying to see if I can run 35x12.5 toyo mts which are 13.2 inches wide on +25 offset wheels.

 

[ahetherington]

Looks incredible. Thinking of doing this exact setup. If not too much trouble, you mind posting more pics? Thanks!

 

[Tattoosruinyourlife]

Looks incredible. Thinking of doing this exact setup. If not too much trouble, you mind posting more pics? Thanks!

Not the original poster but I have saltas with 35/12.5 tires no lift no level no problems

 

[Lakanen77]

Not the original poster but I have saltas with 35/12.5 tires no lift no level no problems

Looks brilliant. Several people have said it’s been done with no lift and they experience no rubbing. Is this with the truck level? Have you tried it with the front suspension flexed at all? My question would be if one side is untraveled and turned does it rub?

Cheers


Sent from my iPad using Tapatalk

 

[Tattoosruinyourlife]

Looks brilliant. Several people have said it’s been done with no lift and they experience no rubbing. Is this with the truck level? Have you tried it with the front suspension flexed at all? My question would be if one side is untraveled and turned does it rub?

Cheers


Sent from my iPad using Tapatalk

I have stock suspension. I have never rubbed in anyway. I don’t off road with my truck so it has never been fully flexed but I do drive a lot of dirt roads with some pretty tight off camber switchbacks and still it hasn’t rubbed. Hope that helps.

 

[Lakanen77]

I have stock suspension. I have never rubbed in anyway. I don’t off road with my truck so it has never been fully flexed but I do drive a lot of dirt roads with some pretty tight off camber switchbacks and still it hasn’t rubbed. Hope that helps.

Yes thank you.


Sent from my iPad using Tapatalk

 

[301cummins]

Well so far so good. Fits perfect in my opinion. No rubbing at all. Looks factory!

Love the setup. No lift ? Specs on tire?

 

[johanh13]

Well so far so good. Fits perfect in my opinion. No rubbing at all. Looks factory!

Love that look! Specs are very similar to my innov8 wheels