What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Borla S Type exhaust

Does the Borla exhaust get rid of the muffler that looks like an after thought on the 6.4’s? I never cared for the way they seem to be wedged up in there at an angle.
 
Chris1911 said:
Where are you guys ordering from?

https://www.lmperformance.com/14382...-2-4wd-s-type-cat-back-black-chrome-tips.html

The old part # (the one i have) appears to be in stock here

https://realtruck.com/p/borla-s-type-exhaust-system/bor-140801bc/

https://www.carid.com/borla/s-type-...ystem-with-single-side-exit-mpn-140801bc.html

https://www.lmperformance.com/10864...haust-system-s-type-with-back-chrome-tip.html

Chrome tip

www.summitracing.com

Borla 140801 Borla S-Type Cat-Back Exhaust Systems | Summit Racing

Free Shipping - Borla S-Type Cat-Back Exhaust Systems with qualifying orders of $109. Shop Exhaust Systems at Summit Racing.
www.summitracing.com www.summitracing.com
Click to expand...

goturbo.net

Borla 19-22 RAM 2500/ 3500 6.4L V8 AT 2/4WD 3in S-TYPE Cat-Back Silver Tips - 140851

Borla 19-22 RAM 2500/ 3500 6.4L V8 AT 2/4WD 3in S-TYPE Cat-Back Silver Tips - 140851
goturbo.net goturbo.net

$100+ cheaper...I will wait.
 
leaf001 said:
How long did it take you? I've never worked on an exhaust before...want to save a few bucks and install it myself (no lift or blocks).
Click to expand...
Took about an hour and a half...start to finish. I had a lift and and an extra set of hands. It can be done on the ground. Might be a bit tougher though.
 
So the OEM pipe clamps are riveted on.

The Borla kit only came with 2 pipe clamps....soo gotta drill out the old one to install the new setup.
 

Attachments

  • 20220701_164552.jpg
    20220701_164552.jpg
    295.4 KB · Views: 40
  • 20220701_164555.jpg
    20220701_164555.jpg
    314.1 KB · Views: 40
  • 20220701_164549.jpg
    20220701_164549.jpg
    253.1 KB · Views: 40
Last edited:
I recently had the Borla system installed on my PW. It’s is amazing indeed and a worthy mod. I’ve only been around town so far, but it’s got a nice deep tone but not overly loud while getting around the neighborhood.
 
Yeah it's kind of a bastard on the ground getting the resonator section out. Anyone else have leaks at the joints? Mine drip.
 
leaf001 said:
So the OEM pipe clamps are riveted on.

The Borla kit only came with 2 pipe clamps....soo gotta drill out the old one to install the new setup.
Click to expand...

I didn't have to do anything like that with mine.
 
IowaPW said:
Mine came with 3.
Click to expand...
I bought the new model for the '22 PW (2500 6.4L). Even the instructions listed that only 2 pipe clamps camp with the kit....not that big of a deal, just wasn't expecting to have to drill out the rivets.
 
leaf001 said:
I bought the new model for the '22 PW (2500 6.4L). Even the instructions listed that only 2 pipe clamps camp with the kit....not that big of a deal, just wasn't expecting to have to drill out the rivets.
Click to expand...
Interesting!
 
leaf001 said:
I bought the new model for the '22 PW (2500 6.4L). Even the instructions listed that only 2 pipe clamps camp with the kit....not that big of a deal, just wasn't expecting to have to drill out the rivets.
Click to expand...
I just bought the same one, so will let you know how many I get. The parts list shows only 2, however the step-by-step instructions indicate there should be three (Steps 2, 4, and 5)
 
Chris1911 said:
Love the sound at idle.

Click to expand...

Sounds awesome! Is this a cold start? Had the ATAK on my old F150 5.0 and cold start was pretty loud on winter mornings @04:30 going to work. The neighbors knew I was up, I live in a condo. Can you post a drive by video?
Really thinking about this, I’m only 15 miles from their factory.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top