Dinky503
Well-Known Member
I have..... the cones inside are different on the SAE vs normal. you will have to sacrifice a set of sports to convert them, the parts are not available to buy besides the lenses and bezel.
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
BAJA Design Squadron Fog Light Kit
- Thread starter diablo82
- Start date
I have..... the cones inside are different on the SAE vs normal. you will have to sacrifice a set of sports to convert them, the parts are not available to buy besides the lenses and bezel.
Dinky503
Well-Known Member
I did this the first hour it was announce and available to buy on their web site. I will be doing a write up on the differences once they come in, so people can see what they want to do.
I ordered them march 1st, next week will be week 4 so they could ship any day now.
MooneyFWD
Active Member
- Messages
- 216
- Reaction score
- 163
- Points
- 43
I actually just did this recently. The fogs seem to shoot higher now than they did with the wide cornering lens.
That's what I was worried about. I have the Sports and while I don't get flashed much, it occasionally happens. A bit longer range would be nice with a more directed beam.
Sent from my SM-G975U using Tapatalk
Andersen24
Well-Known Member
Yeahhhhhhh, I'm that guy that went with the Squadron R-Pro's. I have had them on for a couple of months and have yet to be flashed........then again I identify as a PowerWagon and NOT a Tacoma!
I'm pretty sure it's more than just the lens? I think the reflector inside is different as well because I was hoping to just swap the lens cover and it didn't look like it would work to give me a true SAE version.
BD told me to change out the lens. Mine are not the SAE. It wouldn't make sense for a chase light.
Oh, I thought you had the SAE and wanted the regular sport.
RamaLamaDingDong
New Member
Hey all, just installed the squadron sports this weekend and noticed I have a 1 inch gap between light and bezel on the passeneger side and no gap on the driver side. Is this normal or did I screw something up somewhere? 
Rockcrawlindude
a rock crawlin’ dude
Mine both look like the driver side but I have an aev bumper. It does use all the factory fog mounts and fog bezels so should be similar
SpeyRam
Well-Known Member
I'm also in the process of installing these and I noticed a gap on both sides but it wasn't an inch, more like a 1/4" or so. Some of it looks to be from the rotation of the light in the bracket. But I wasn't thrilled with the fit of the bezels into the bumper.
Kross
New Member
- Messages
- 11
- Reaction score
- 5
- Points
- 3
Did you ever find the answer to this? I've recently installed the Sport's and would like to disable the cornering feature.
MooneyFWD
Active Member
- Messages
- 216
- Reaction score
- 163
- Points
- 43
No. Everyone seems to think I'm an idiot for wanting to turn this feature off. Maybe they're right!
Dinky503
Well-Known Member
I don't think you're a idiot, that feature would drive me nuts going down the road lol. I think there will be a setting in alpha obd.. I have read it on another forum.