Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. ZFORCE

    From Tacoma to Torque: My First Ram Is on the Way

    Welcome, I too came from Toyota land, too many Tacomas and Tundras to count. I now own 2 2500, CDs and a 1st gen Tacoma Crewcab, 4x4 as a backup that I call Tiny! The Ram CDs come with a learning curve!
  2. ZFORCE

    This is my 6th Ram Vehicle Purchase Not The Best....

    First welcome to the forum. Second, sorry about your truck! I have a 2021 and a 2024 both 2500 CDs. So far no electrical gremlins. That’s very frustrating, I have seen people say to just push down on all the fuses and relays as they can be installed improperly and need to be seated. I hope it...
  3. ZFORCE

    Help please, Rear park sensor depinning XY 402?

    I know that some people have had luck pushing a depinning tool through the tiny hole in the white plate, but I’m telling you I’ve tried for hours and it was useless once I removed that white plate. It was a piece of cake. I had all six wires out in less than two minutes.
  4. ZFORCE

    Help please, Rear park sensor depinning XY 402?

    Well here is the solution! There is a secondary hold down, it’s the white plastic plate that is facing you once you undo the XY402 connector! I used a HF Pick tool and gently pried it from side to side until it was removed! Once it was out of the way you can clearly see the tiny clips in the...
  5. ZFORCE

    2025 Ram 2500 - Door Panels

    I believe the interior door handles are different but if the new panels come with them, then you should be set. The ambient lighting is located where the interior door handle is in case you aren’t familiar with it. Also, depending on which mirrors the limited is equipped with the mirror control...
  6. ZFORCE

    Help please, Rear park sensor depinning XY 402?

    Hey guys, I am at my wits end. I am working on my 2021 ram 2500. I am removing the rear park sensor wiring that I purchased from Jimmy 07 here on the forums, so that I can put them into my 2024 ram 2500. For some reason, Jimmy stopped answering my DMs. He’s probably just really busy. I know he’s...
  7. ZFORCE

    2019-2024 Diesel Gray Vinyl Supplier?

    Thank you 64 poncho for your reply. I have contacted the company. They do not supply OEM materials but he’s going to look and see if he has a match. If anyone else has a supplier OEM interior vinyl I would greatly appreciate it, just in case it doesn’t work out. I will also follow up to Post if...
  8. ZFORCE

    2019-2024 Diesel Gray Vinyl Supplier?

    So I have a small tear in my driver side seat bottom. It is diesel Gray Vinyl in a Ram 2500 (2021). Does anyone know of a FABRIC/Vinyl supplier that can get me matching diesel gray vinyl? I can sew it myself. Thanks
  9. ZFORCE

    Adding the OEM hidden tailgate strut to any trim.

    I think people make the install seem harder than it actually is. You don’t have to do anything with the clip. Simply remove the passenger side taillight, open the tailgate, install the strut by pushing it on the ball on top, then go down underneath the truck, and in the corner, you will see the...
  10. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    I’m not sure why the 2023-24 Folding mirrors are so different from the 19-22? Does anyone have any information on the differences?
  11. ZFORCE

    Repinning wire harness question

    You have enough wire there that if it were me, I would just solder and use weatherproof heat shrink. Repinning the connections may cause other issues if they are not inserted properly or are slightly different in size. Good luck, getting rid of the rats/mice is a lot harder! Also, leaving the...
  12. ZFORCE

    Adding the OEM hidden tailgate strut to any trim.

    I have purchased both the OEM Mopar strut and the generic one. The generic (Chinese mfg.) is similar to yours but that is terrible! Even so, the OEM is hands down worth the extra $!
  13. ZFORCE

    Rear view camera while driving ?

    I actually was able to keep the rear backup camera on, on my 2021 Ram 2500 with the upgraded 12.1” screen. Google “got my backup camera to stay on” My HDRams.com post should be first. Hope this helps, maybe you can test this method out on the Promaster and report back, for others to see.
  14. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    I’ll simplify it, Infotainment is too Expensive!
  15. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    Of course, but my first kid has already moved out and I’m fond of my arms and legs so I won’t be able to pay for it! Besides Jimmy will probably beat them to it anyway! Support your fellow Ram owners (Jimmy07)!
  16. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    @Jimmy07, I’m hoping Jimmy can help!
  17. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    I would love the instructions! I bought the switch and modules for a 2019-2021 (probably good till 2022). So it looks like the 2023 and up Ram 2500 parts are different. Thanks!
  18. ZFORCE

    Are Ram Seat Foams the same, vinyl vs cloth, 2021 vs 2024

    No ventilation in either, maybe it’s just the difference in vinyl vs cloth. Or maybe it’s just in my mind! Either way I am going to swap the cushions, as my 24 has dark cloth and the 60/40 rear seat that I am putting in it is leather! This means that I will have to reupholster all the seats in...
  19. ZFORCE

    Adding automatic folding mirrors to a 2024 Ram 2500 Tradesman?

    Does anyone have any information at all? Thanks.
  20. ZFORCE

    NO LONGER AVAILABLE: Looking for a Part Number? Must provide VIN (only up to model year 2020 at this time)

    Thank you 01Time! We have company from Chicago all this weekend and my iPad has zero memory so I can’t quite get to those pictures/part numbers. Once they leave I will check them out. Thank you for taking the time to help me out! I will circle back and let you know soon!
Back
Top