Recent content by Dewey

Ya a little much they stick out .950 and a cap may add .050. I used them on my front shocks I have not done the rear yet. I change service all 4 in the spring.

This is the fix not to have to buy the 400$ tool. https://www.kartek.com/parts/fox-shocks-replacement-schrader-air-valve-stem-for-ford-gen-2-raptor-or-shocks-that-use-10-24-thread.html valve-stem-for-ford-gen-2-raptor-or-shocks-that-use-10-24-thread.html

You have a Diesel right? 1 inch Thuren front springs, shock and a front sway bar. This may not be the cheapest, it will improve your ride.

Power will be better as the engine will get easier air. Its hard to tell the throttle movement is controlled by the computer. I run without the charcoal filter and a Diesel air filer. The charcoal filter is an emissions thing to help with off gassing. I Found filter top from eBay for 40$ to...

That's probably true. On SXS shocks I drill and tap them then use Schrader valves. They work out great. not saying that's what you should do. Sounds you know what you need or want to do. If I am told I can't do that is a good motivator to do it my own way buys some tools and learn some ****...

I suggest when servicing the shocks is to go to a Schrader valve. I have used needle for year and never feel good about them. When I pressurize a shock when needles I an never confident on the pressure. Some time when removing the needle they will leak. You can get the Schafer valve s from...

So I have had more BFG tires than I can count on my trucks and my wife's trucks. I know how they will handle a variety of terrains. I tried a motto tire and could not take them of fast enough. 4000 miles. Then went back to a KO2 3s were not available. I am looking for my next set of tires and...

Not sure but I would really like to have a hood ornament like that one. My guess is the grill is a 1 off like the hood ornament.

Setting the tire size will smooth out the shifting. I changed mine a few times to get it right. Once I did the truck is nicer to drive an pull with.

I have been using boeshield T9 on my amp steps. Had them on for 3 years now.

Thank you guys. I have been pondering on the Rough Country mat but they don't have the best quality in their lift parts. At Wife said buy a horse mat and cut it to fit. A 5x8 horse mat is about 300.00 and some time to cut it to fit.

I am looking for some information on rubber bed mats. Most of the reviews I read are negative are they all bad and don't fit well. Ram 2500 6.4 bed. If you have one is it good, does if fit? Thanks for any info!

Lol mine lasted 4000 miles rough, noisy and loose feeling. Wish I would not have done that.

I used a right angle drill with a short drill. And make sure to stand on them or seat them as the video describes. https://www.milwaukeetool.com/products/2415-20

Thank your for your reply Iris do all of this so may times 20 + over the last 2 weeks. And it wound not clear. Your instructors are very clear thank you for that.