Getting ready for our first trailer towing with our new ‘24 2500 with factory airbags. I’ve been doing some research, but wanted to run it by the experts here. I use a blue ox sway pro wdh if that matters. With the exception of disabling/enabling the airbags, it’s the same process I used with our 1500 without airbags.
From researching, I think the steps are:
1. Disable airbag by going into tire jack mode.
2. Couple trailer to hitch
3. Raise trailer hitch with trailer jack
4. Connect sway bars to appropriate tension
5. Lower trailer hitch all the way
6. Enable airbags by ending tire jack mode, or drive off (the airbag tire jack mode is disabled above 5mph)
Does that make sense?
Thanks
From researching, I think the steps are:
1. Disable airbag by going into tire jack mode.
2. Couple trailer to hitch
3. Raise trailer hitch with trailer jack
4. Connect sway bars to appropriate tension
5. Lower trailer hitch all the way
6. Enable airbags by ending tire jack mode, or drive off (the airbag tire jack mode is disabled above 5mph)
Does that make sense?
Thanks