Does anyone know why power is not at the brake light switch. I have three wires 2 of them prob -.32 on volts meter. I thought there was supposed to be power to the switch with or without the ignition on I have turn signals and emergency flashers just no brake lights..I replaced the switch, but it has no power to it all fuses un the TIPIM prob good with a test light. Any ideas. Thanks confused!
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
no power to 2020 ram classic brake light switch
- Thread starter slowpokie
- Start date
H3LZSN1P3R
You're doing it wrong
- Joined
- May 29, 2020
- Messages
- 9,123
- Reaction score
- 8,273
You would likely be better on a forum for 1/2 ton trucks
But you need to trace the input wire and find the issue
But you need to trace the input wire and find the issue