Mods so far

[Higholesilver2.0]

2022 Tradesman: window tint, step bars, roll up bed cover, upgraded from 18” factory wheels to 20” and MBRP 4” cat back is on the way.

 

[Sage6058]

2021 Tradesman Level II
Tinted windows
Nerf bars
Truxedo tonneau cover
12 volt solutions remote start
Should have Baja Designs fog lights for Christmas!

Sent from my SM-N975U using Tapatalk

 

[6.4ram]

I swapped for the same shoes too!

 

[Higholesilver2.0]

Have added 35s with Fuel Contras, bushwhacker flares, pro comp two inch level, MBRP catback, and vent shades

 

[elephantrider]

'19 peasant.
3" carli fronts
2.5" pure performance rears
nfab epyx steps
tint
bed liner
softopper
8.4" upgrade
oem led light housings f/r
oem aux switches
baja squadrons
35x12.5 18
trx starter button
s&s Supersport cp3
bmp front and rear cat filter kits
airlift 5k bags
exhaust work

 

[MoparMom]

View attachment 26042View attachment 260432022 Tradesman: window tint, step bars, roll up bed cover, upgraded from 18” factory wheels to 20” and MBRP 4” cat back is on the way.

What have done since this ? I'm waiting on my Tradesman and looking for ideas.

 

[Higholesilver2.0]

Fuel wheels , bushwhacker fender flares, 35x11.50 Nitto Ridge Grappler tires, and a pro comp 2 inch leveling kit on the front

 

[Send2joey]

What have done since this ? I'm waiting on my Tradesman and looking for ideas.

For ideas - nerf bars/side steps, bull bar on the front, tint on the glass, vent shades, fender flares, a wrap on the rockerpanels, added fog lights, and the dog seat cover/bridge (now have a big piece of artificial turf over the vinyl). Also replaced, CHMSL, backup light, and all tail lights with LED. Got a bug deflector for the hood, bed lights, and a tailgate light bar to install yet.

 

[loveracing1988]

For ideas - nerf bars/side steps, bull bar on the front, tint on the glass, vent shades, fender flares, a wrap on the rockerpanels, added fog lights, and the dog seat cover/bridge (now have a big piece of artificial turf over the vinyl). Also replaced, CHMSL, backup light, and all tail lights with LED. Got a bug deflector for the hood, bed lights, and a tailgate light bar to install yet.
View attachment 35964View attachment 35965View attachment 35966

The black on the rocker panels, what is that?

 

[Send2joey]

The black on the rocker panels, what is that?

That's a vinyl wrap. Non adhesive, they kinda stretch and heat it and then it sticks, they say also easy to remove with a heat gun later. Should get 4-5 years out of it - wasn't 100% sure I'd like the black on the bottom so was more comfortable with $300 wrap rather than the $1,500 the local truck upfitter wanted to do a Bullet liner on same.

 

[loveracing1988]

That's a vinyl wrap. Non adhesive, they kinda stretch and heat it and then it sticks, they say also easy to remove with a heat gun later. Should get 4-5 years out of it - wasn't 100% sure I'd like the black on the bottom so was more comfortable with $300 wrap rather than the $1,500 the local truck upfitter wanted to do a Bullet liner on same.

I have enough raptor liner to do my rockers along with both bumpers and my fender flares. Just can't just can't will myself to take sandpaper to my paint...

 

[Highcountry]

For ideas - nerf bars/side steps, bull bar on the front, tint on the glass, vent shades, fender flares, a wrap on the rockerpanels, added fog lights, and the dog seat cover/bridge (now have a big piece of artificial turf over the vinyl). Also replaced, CHMSL, backup light, and all tail lights with LED. Got a bug deflector for the hood, bed lights, and a tailgate light bar to install yet.
View attachment 35964View attachment 35965View attachment 35966

who makes the dog seat protector? I have a nice seat cover, but my Lab keeps sliming the back of the seats

 

[Ickabod]

who makes the dog seat protector? I have a nice seat cover, but my Lab keeps sliming the back of the seats

Here is the one I use by 4knines.

 

[406Linetrash]

2020 Tradesman lvl2
2.5 level
35x11.5 Wildpeak at3w
Ionic 4" tube steps
Bedliner
Tinted windows
Backrack
Light bar on back rack.
Weather guard chest I've had for years. Took a few mods to get it to fit.
B&w turnover with companion.
Took a good long weekend to get it all in. But the newer trucks lend themselves to backyard warriors. Easiest b&w install I've ever had. I had the bedliner done by a shop though. I don't trust the over the counter ones yet.

 

[Send2joey]

who makes the dog seat protector? I have a nice seat cover, but my Lab keeps sliming the back of the seats

Amochien off of Amazon: https://www.amazon.com/gp/product/B076P9HT5K/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

really good fit for the truck

 

[H3LZSN1P3R]

I have enough raptor liner to do my rockers along with both bumpers and my fender flares. Just can't just can't will myself to take sandpaper to my paint...

I had a truck that i sprayed with raptor liner as nice as the stuff was it would never come clean after it got dirty so just a word of caution unless you clear coat it after it wont look good like a wrap or even paint would

 

[loveracing1988]

I had a truck that i sprayed with raptor liner as nice as the stuff was it would never come clean after it got dirty so just a word of caution unless you clear coat it after it wont look good like a wrap or even paint would

Less to clean then... My last truck had monstaliner on the bumpers and it was a pain to clean but also didn't show dirty near as bad.

 

[Razzman]

Retrax PowerTrax MX tonneau cover
Falken Wildpeak AT3 LT285/65R20 tires
Bedrug XLT Bed Mat
Rove R2-4K Dash Cam
Bayou Goat Mount
Thuren 1" coil lift (front)
Thuren Active Rate sway bar
Fox 2.0 IFP Shocks
Window Tint
AMP Bed Step

 

[Ickabod]

Done:
Husky Mud Flaps
Blackvue Dash Cam
MX4 Tonneau cover

This summer:
Window Tint
RC Light Bar
Bedrug XLT Bed Mat
Nitto Ridge Grappler tires

 

[MoparMom]

For ideas - nerf bars/side steps, bull bar on the front, tint on the glass, vent shades, fender flares, a wrap on the rockerpanels, added fog lights, and the dog seat cover/bridge (now have a big piece of artificial turf over the vinyl). Also replaced, CHMSL, backup light, and all tail lights with LED. Got a bug deflector for the hood, bed lights, and a tailgate light bar to install yet.
View attachment 35964View attachment 35965View attachment 35966

Thats too funny! We're planning on wrapping the rockers on ours when it gets here. But what bullbar are you sporting? AND did it allow keeping tow hooks?