Console mount phone holder.

[Sponge60]

Would like to see pics of some of your phone mounts. Particularly those that have mounted your phone in the center console area.

On my Silverado, proclip made a mount that attached to the side of the console. Very convenient place I thought.

I've seen the upper dash mounts, but not a fan. Ordered a cupphone mount, but would enjoy seeing other ideas.

 

[el_barto]

I have the proclip vent mount . It’s placement is good, doesn’t rattle, phone is solid even offroad... but it does block some vent flow when a phone is in it. Good placement for nav etc in addition to CarPlay.

 

[Sponge60]

I have the proclip vent mount . It’s placement is good, doesn’t rattle, phone is solid even offroad... but it does block some vent flow when a phone is in it. Good placement for nav etc in addition to CarPlay.

Nice. Do you have a part number to share? Was it Ram specific?

 

[jadmt]

2020 RAM 2500 Dashboard Phone Mounts

ProClip Dashboard Phone Mounts are designed to fit your 2020 RAM 2500 with precision. Get the most secure mounting base for your phone, GPS or mobile device.

www.proclipusa.com

 

[el_barto]

That’s the one^^^
Interesting it says not for column shifter, I guess that makes sense. I have the Hemi so not an issue.

 

[First World Problems]

Couple more viable options as well that have more universal application potential:

2019+ RAM Truck 1500, 2500, 3500, 4500 & 5500

Rock Solid & Reliable RAM Truck Phone Mounts and RAM Truck Phone Holders by Bulletproof Mounting Solutions. Phone Mounts for the 2019+ 5th Gen RAM Truck 1500, 2500 and 3500. Choose from a variety of setups including Universal Phone Mounts, Magnetic Mounts, Single or Dual Mounting Solutions.

www.bulletpointmountingsolutions.com

or

2019+ Ram Dash Mount 8.4" screen

Our mount is designed to allow various mounting solutions and accommodate AMPS standard attachments. It includes four built in nuts with provided button head Allen screws to mounts our two hole ball mounts. Fits 2019+ Ram trucks with 8.4" screen. 12" screen dash mount coming soon. Pair it with...

www.ics-fab.com

 

[Pronto]

I have the proclip vent mount . It’s placement is good, doesn’t rattle, phone is solid even offroad... but it does block some vent flow when a phone is in it. Good placement for nav etc in addition to CarPlay.

I've been impressed with mine, real solid. I ended up getting the model that attaches to the passenger vent. I was worried about the drivers side blocking my airflow and the cable routing on the passenger side is cleaner in my truck. I don't mess with mine much when it's hooked up so it's not a big deal being further away. I like it out of my way.

 

[DeepH20Driller]

The ProClip WILL NOT work with Cummins vehicles. The column shifter gets in way. I had one in 1500 and kept it. Tried installing in current truck and no go. I bought this one off Amazon and it suction cup mounts to side of inner console. I love it. Out of the way and easily accessible when needed.

Sent from my iPhone using Tapatalk

 

[DeepH20Driller]

Here’s another option, that’s a little less than ProClip and mounts in same location. They’re made in Louisiana.

https://bayougoatmounts.com/products

Sent from my iPhone using Tapatalk

 

[Lawdog3500]

Here’s another option, that’s a little less than ProClip and mounts in same location. They’re made in Louisiana.

https://bayougoatmounts.com/products

Sent from my iPhone using Tapatalk

Those are sweet. The website is a bit vague. Does the double mount block the accessory part in the tray or is it still available?

 

[Brewbud]

The ProClip WILL NOT work with Cummins vehicles. The column shifter gets in way. I had one in 1500 and kept it. Tried installing in current truck and no go. I bought this one off Amazon and it suction cup mounts to side of inner console. I love it. Out of the way and easily accessible when needed.

Sent from my iPhone using Tapatalk

I like those iOtties, but I have had two of them break on me. The spring system inside the unit gives up.

 

[Razzman]

Those are sweet. The website is a bit vague. Does the double mount block the accessory part in the tray or is it still available?

I have the Bayou double tray mount and it does not block the outlet, take out the tray screws and install, that simple. It is a pain in the rear to tighten the screws though. Had the triple in my 1500, they make a quality product. I use it to mount my trailer cam monitor and TTMS using Clutchit magnetic mounts.

 

[drodegeb]

I have the Bayou double tray mount and it does not block the outlet, take out the tray screws and install, that simple. It is a pain in the rear to tighten the screws though. Had the triple in my 1500, they make a quality product. I use it to mount my trailer cam monitor and TTMS using Clutchit magnetic mounts.

View attachment 32570

I'm planning to order one from here https://www.bulletpointmountingsolutions.com/collections/2019-ram-truck-1500-2500-3500, similar to the one you mentioned, but uses arms like RAM mounts (Or you can leave their mounts off and use any AMPS mounts like RAM).

 

[Rockcrawlindude]

Seems like a great option

Universal Cell Phone Car Holders - CupFone | WeatherTech

Allows for easy hands-free phone use and fits most mobile phone sizes. WeatherTech CupFone is designed to fit perfectly in any vehicle cupholder.

www.weathertech.com

I have a ram mount in my Toyota but there is no windshield and it mounts directly to the roll cage. I really like the ram mount for a permanent install

 

[Brewbud]

I'm planning to order one from here https://www.bulletpointmountingsolutions.com/collections/2019-ram-truck-1500-2500-3500, similar to the one you mentioned, but uses arms like RAM mounts (Or you can leave their mounts off and use any AMPS mounts like RAM).

I have the Bullet Points double ball mount. If you already have Ram mounts arms you may need an adapter. All my Ram mounts are 1" balls. The BPs are 20mm

 

[GLB1950]

I like the magnetic mounts and tried to find one that didn't interfere with the uconnect or sit up so high to cause visual problems. This cost me $20 bucks for the ball mount and I made the aluminum bracket for mounting to the dash. It doesn't block anything I need to see and I can mount it lower or higher to suit my disposition of the day. And it sits in such a position that I don't technically take my eyes off the road to see the screen.

 

[Brewbud]

I like the magnetic mounts and tried to find one that didn't interfere with the uconnect or sit up so high to cause visual problems. This cost me $20 bucks for the ball mount and I made the aluminum bracket for mounting to the dash. It doesn't block anything I need to see and I can mount it lower or higher to suit my disposition of the day. And it sits in such a position that I don't technically take my eyes off the road to see the screen.View attachment 32594View attachment 32592

The dual Bullet Mount can put phone in the same area. That is where I run mine sometimes.

 

[Lawdog3500]

Glad to get this thread revived. Thanks for the reply Razzman. I ordered one from Bayou. I am looking for space for the TPMS monitor and for a rear view camera when the Momentum is following me around.

 

[Razzman]

Glad to get this thread revived. Thanks for the reply Razzman. I ordered one from Bayou. I am looking for space for the TPMS monitor and for a rear view camera when the Momentum is following me around.

No worries, glad to help. If you find that the suction cup mounts are too big consider Clutchit magnetic mounts, they are a lot smaller and hold well. You might have to modify the back of your device to use them though. Here they are on my 1500 setup. I like them as I
can easily move stuff around, left/right and up/down. While space wasn't an issue with the triple mount on the 1500, the double is smaller.

 

[NC Rebel]

Here's my set up with the Bullet Point Mounts,