Good afternoons all. I found replacement screws for the truck link was posted above.
I also cut 3/4 of an inch off the mount and reattached everything to that the mount rides flush in that cubby.
You will notice furniture pad under the left side of the mount incase the edge for some reason slaps the dash, I wanted to protect it.
I’ll take this mount back off and Res pray it to make it nice again.
With the mount secured with screws and lowered, there is no worries of it coming lose. Now I will attach “a wing nuts to the side thumb screws for ease of use.
Respectfully
Chris
Sent from my iPhone using Tapatalk