Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2022 Ram HD Builds and orders - Post and discuss your TRUCK order here! ** NEW USERS READ POST #1 **

sfort

Active Member
Joined
Jun 18, 2019
Messages
93
Reaction score
216
Mine was there over a week for bedliner and steps.
The only things that I can think of that mine might have gone for are the bedliner and fifth wheel prep. It's a long bed so I don't know if that plays into it going to Utilimaster instead of Vascor...
 

Thebuilderman

Well-Known Member
Joined
Jul 4, 2021
Messages
637
Reaction score
1,435
Location
Colorado
Ordered 6/29
D1 9/14
Built 10/9
JS 10/9
Equipment listing posted 10/11
Window sticker posted 10/30


Sent from my iPhone using Tapatalk
Ok thanks, for a moment I had my hopes up that I wouldn’t have a 5 month wait. That would have been too good to be true. I’m good now.
Great truck. Can’t wait to see your photos when you get it.
 

RubiRam392

Jackass 4th grade bully
Joined
Aug 14, 2021
Messages
207
Reaction score
366
Location
Sandy, UT
Mine was there over a week for bedliner and steps.
The only thing I could think of for mine is the rock rails and the winch. Like you said I would have thought the winch would have been set in place long before it was completely built and sent to the vendor
 

brv10

has the scoop
Joined
Jun 13, 2021
Messages
3,330
Reaction score
7,340
The only thing I could think of for mine is the rock rails and the winch. Like you said I would have thought the winch would have been set in place long before it was completely built and sent to the vendor
The winch is WAY easier to do with the body off.
 

brv10

has the scoop
Joined
Jun 13, 2021
Messages
3,330
Reaction score
7,340
The only things that I can think of that mine might have gone for are the bedliner and fifth wheel prep. It's a long bed so I don't know if that plays into it going to Utilimaster instead of Vascor...
Mine also has a bedliner and 5th wheel, I doubt it's the box because others have not gone there, oh well, you are out and waiting!
 

sfort

Active Member
Joined
Jun 18, 2019
Messages
93
Reaction score
216
The only thing I could think of for mine is the rock rails and the winch. Like you said I would have thought the winch would have been set in place long before it was completely built and sent to the vendor
Wife ordered a Tremor with the winch. Ford ships the winch to the dealer for the dealer to install it after the truck is built. I would much rather have it come in already installed.
 

ACEd

Well-Known Member
Joined
Sep 13, 2021
Messages
906
Reaction score
1,418
I have been tracking trucks with TTPMS in Equipment List but No Window Sticker - until yesterday there were 36 such trucks - 31 of those now have stickers on the Chrysler site. Congratulations
NG1019013C63RRHL4NG101901
NG1021933C63R3EJ8NG102193
NG1026113C63R3SL3NG102611
NG1036053C63RRJL7NG103605
NG1036473C63R3JL5NG103647
NG1055303C63R3ML0NG105530
NG1070923C6UR5SL8NG107092
NG1149903C6UR5SL9NG114990
NG1152093C6UR5FJ9NG115209
NG1168713C6UR5NL6NG116871
NG1168883C6UR5DLXNG116888
NG1169173C63R3JJ9NG116917
NG1191253C6UR5GJ3NG119125
NG1192093C63R3EL3NG119209
NG1207243C6UR5KL7NG120724
NG1207513C63R3PL9NG120751
NG1215343C63R3JL5NG121534
NG1218983C63R3PL0NG121898
NG1225263C63RRKL9NG122526
NG1225613C63RRRL3NG122561
NG1225643C63RRRL9NG122564
NG1364143C63R3SL6NG136414
NG1370323C63R3NL3NG137032
NG1380603C63RRKL3NG138060
NG1383563C63R3PL5NG138356
NG1410443C63R3PL1NG141044
NG1412073C63RRNL6NG141207
NG1541293C63R3EL4NG154129
NG1542703C63RRJL4NG154270
NG1564373C63R3KL8NG156437
NG1608633C6UR5NL7NG160863
NG1618703C6UR5SJ5NG161870
 

mbarber84

Moderator
Staff member
Joined
Sep 10, 2021
Messages
2,122
Reaction score
3,203
Location
Washington County, PA
Ok thanks, for a moment I had my hopes up that I wouldn’t have a 5 month wait. That would have been too good to be true. I’m good now.
Great truck. Can’t wait to see your photos when you get it.

Thanks! Yes I will definitely get some pics once it arrives


Sent from my iPhone using Tapatalk
 

sfort

Active Member
Joined
Jun 18, 2019
Messages
93
Reaction score
216
Now it's back at the assembly plant waiting for a truck to Laredo. Once it gets to Laredo, it should only be a 3 hour truck ride to my dealer. Shipping date is still 11/3, so I am not sure if I will see it this week. The paint may not be dry when it gets here.

Truck​

Leg OriginLeg DestCarrierEstimated Truck OutgateRelease DateOutgateDelivery Date
UTILIMASTERSALTILLO TRUCK ASSEMBLY PLANTXTRA10/31/21 10:51:00 AM10/31/21 10:52:00 AM

Truck​


Leg OriginLeg DestCarrierEstimated Truck OutgateRelease DateOutgateDelivery Date
SALTILLO TRUCK ASSEMBLY PLANTLAREDO YD, TXSWFT
 

neophyteguy

Active Member
Joined
Jul 27, 2021
Messages
53
Reaction score
154
Now it's back at the assembly plant waiting for a truck to Laredo. Once it gets to Laredo, it should only be a 3 hour truck ride to my dealer. Shipping date is still 11/3, so I am not sure if I will see it this week. The paint may not be dry when it gets here.

Truck​

Leg OriginLeg DestCarrierEstimated Truck OutgateRelease DateOutgateDelivery Date
UTILIMASTERSALTILLO TRUCK ASSEMBLY PLANTXTRA10/31/21 10:51:00 AM10/31/21 10:52:00 AM

Truck​


Leg OriginLeg DestCarrierEstimated Truck OutgateRelease DateOutgateDelivery Date
SALTILLO TRUCK ASSEMBLY PLANTLAREDO YD, TXSWFT

Is that level of detail from your dealer? Thanks…
 

Thebuilderman

Well-Known Member
Joined
Jul 4, 2021
Messages
637
Reaction score
1,435
Location
Colorado
I know I might be a little insane, but did anyone else's truck arrive with blue "chalk" marks on the paint? That's what my dealer said it was, it generally rubs off with your finger if you scrub at it. Also found some on on buttons on lumbar support and chair buttons that does not want to come off. I'm afraid to use alcohol cause I know that can make certain plastics turn white.

Anyone else notice this? The paint ones are not of concerned I already got all those off, but the buttons inside I have not. I've tried scratching at with my finger nail and some has come off but not really. I'm trying to just ignore it but my OCD is killing me on my all black interior to just know that there's a blue mark even on a button I can't see.

Suggestions anyone?
I do, not sure if it’ll work but I feel it will and it won’t harm the plastic but you should read the bottle or can.
goof-off and WD-40. Both work for us in the construction industry well and never do any damage.
 

Brutal_HO

The Mad Irishman
Staff member
Joined
Feb 1, 2020
Messages
12,220
Reaction score
21,860
Location
Douglas County, CO
Going off topic for a moment… the long white light is the DRL. When do the set of 4 burn as opposed to the outside head light? Are they parking lamps? The outside light is the one that moves when turning?

View attachment 24631

The white strip on the bottom is not the DRL. It, along with the cluster of 4 inboard of the projector, is called signature lighting, and are on any time the vehicle is running with no way to turn them off. They will also be on if you just have the parking lights on. The DRLs are the low beams in the projectors, and there will be a setting in the radio settings to toggle them on or off, unless it’s a Canadian build.
The projectors are adaptive with steering, and they house an array of LEDs, not LED “bulbs” like replacement bulbs you see being sold. The LED array handles both high and low beams.

This pisses me off more and more every day as we get closer to our big game hunting season. When we don't have to hike in (when hunting some private property with drive-in access), we like to sit in the dark with the vehicle running to stay warm if we're early in. (Yea, old and bum knees here.) This year the core team all have new "SUV" cars that are useless so I'll be the one hauling 3-4 of us around in my $87K "pickup" with no way to kill those lights.
 

Brutal_HO

The Mad Irishman
Staff member
Joined
Feb 1, 2020
Messages
12,220
Reaction score
21,860
Location
Douglas County, CO
I do, not sure if it’ll work but I feel it will and it won’t harm the plastic but you should read the bottle or can.
goof-off and WD-40. Both work for us in the construction industry well and never do any damage.

Avoid goof-off, it can melt plastics and ruin many finishes.
 

Divilish

Member
Joined
Jul 27, 2021
Messages
24
Reaction score
40

Ickabod

Well-Known Member
Joined
Jun 11, 2020
Messages
248
Reaction score
288
This pisses me off more and more every day as we get closer to our big game hunting season. When we don't have to hike in (when hunting some private property with drive-in access), we like to sit in the dark with the vehicle running to stay warm if we're early in. (Yea, old and bum knees here.) This year the core team all have new "SUV" cars that are useless so I'll be the one hauling 3-4 of us around in my $87K "pickup" with no way to kill those lights.
Maybe you can pull the fuse, or just put electric tape over it for the hunting trip.
 

Users who are viewing this thread

Top