Hello fellow ram fans. I have removed my stahl utility bed off of my 2014 2500 4 door and purchased a 2019 long bed with electric push button tailgate. Does anyone have ideas as to where I would splice the 3 wires coming from tailgate pigtail as pictured below. (I’m not installing camera)
The 3 wires from pigtail are green, tan/green and black. The green wire (along with black ground) goes to the push button. The tan/green (along with black ground) goes to latch mechanisms on both sides of the tailgate.
It seems like I would need to splice into the lock/unlock circuit on one of the doors but aren’t sure which one or which wires.
Any help would be greatly appreciated.
Thanks in advance.
The 3 wires from pigtail are green, tan/green and black. The green wire (along with black ground) goes to the push button. The tan/green (along with black ground) goes to latch mechanisms on both sides of the tailgate.
It seems like I would need to splice into the lock/unlock circuit on one of the doors but aren’t sure which one or which wires.
Any help would be greatly appreciated.
Thanks in advance.
