Search results

hoping someone might be able to give some advice on better accessing the light grey and dark grey connectors that are fixed to the PDC just rearward of the battery in the hood/engine compartment,. the connectors where we snap in the wires with metal blades. the two connectors on mine are angled...

2022 Ram 2500 . just moved from a power wagon to handle some new towing needs. question...on my PW, i struggled to find solid 12v power that comes on with the truck /off with the truck for radar and dash cam. the 2500 im picking up has VSIM. 1. is tehre a current link for documentation on...

my two cents..having owned some of these big 5th wheels, i would strongly recommend a DRW if not for towing capacity/pin weight/gcvr but just the control of the thing, stability, a wider platform in the rear to keep the 5th wheel from overly influencing the truck. i have a DRW and really...

1 hour. simple install. 'toughest' part is having a drill bit and mental fortittude<G> to drill a hole through your nice new truck bed and getting under neath and up into that section near the wheel well. . but then its a simple routing it down, zip tying it up, and connecting existing into...

you mean the storage boxes that are on each side of the truck? t his will fit beds that have ram box for sure. it simply requires the BW turnover ball hitch installed. its about a 300 to4 00 buck piece and takes 2 hours to install. then you have 30k gooseneck towing, and then this RVK 3400...

yeah, maybe should have gone that route but all those sliders are so heavy.

ran into this, wondering if that marketing or actual 'data and performance is all we care about" https://www.businesswire.com/news/home/20170510005497/en/

whats the best/right diesel supplement to add for these cumming motors? was reading this pdf, and some look way better than others. only thing ive ever know , so far, is the Kleen stuff. what does Cummings/ram recommend? and what do they recommend come cold weather? lastly, my truck didnt...

yup, that was it.

1 and 2 set to battery by default. maybe thats it. ill look at aux 2 tomorrow and try it again. that would be easy enough to test out. i remember a day when toyota and the tundra technologies outpaced ford, ram/dodge and chevy by 5 fold. some of this stuff , and the dash, the uconnect...

here is the imnage. some bizarre behavior. when i went thru commercial settings just now, to get you the photo, aux1 looked like it could infact now allow a Last State change to on. earlier today both AUx1 and 2 were greyed out onthe Last State toggle. the rest were able to be edited, and aux 3...

greyed out on mine. says "Unable to modify State - see manual" and the Last State is greyed out. no biggie but not sure the reason why. maybe because 1 and 2 are the bigger amp circuits, 40 i believe, and maybe they want the car coming on first and you then select it to let that bigger juice...

long story short, we had a short bed 3500. we had the dealer put in the BW turnoverball hitch which we've used many times before on other trucks. works great. we bought the RVK 3400 BW 5th wheel 20k hitch with the nice slider for it. works great. the hauler who was bringing us the truck...

weatherpak makes nice stuff. i only had those deutch connectors as i had a few left over from a dash install we did on one of our customer race cars a bit ago. anyway, for those who stumble into this thread, here's a smidge more info i learned today. got in the RJ11 radar detector hard ware...

got it just about done today. used the white Upfitter connector with the 6 wires. 3 are pass thru, 2 are PTO stuff, 1 is a wimpy ground. i used a 3 pin deutsch connector. we use them in my race car, they are pretty flawless, easy to crimp the pins and barrels and easy to assemble and...

just so im sure i understand what you had when you came into it and what you ended up with.... the bag on the passenger side was not firm, soft, and thats what you wanted, so you adjusted the sensor bracket on the drives side, where the bag was firm, to match the angle of the bracket on the...

planning on connecting some accessories to the AUX ports, etc. and just to be safe, was hoping to disconnnect the battery(ies) before starting. went out there and that drivers side battery has 3 terminals on it. i started to disconnect all 3 and decide to just wait and ask if thats the right way...

in the processing of freeing up my white upfitter ocnnector from Ram jail, i noticed these 7 blunt cut wires near the main PDC. there are 4 near the aux pdc for the passthru, but anyone know about these 7, what they feed? see images

ok, got the white plug out. wasnt 'hard' but, personally, i dont like unplugging big connectors, moving stuff pushing set cables out of the way, just increases the chance of some connection coming bad. anyway, there were two fat connectors just to the side of thea mplifier. i was able to pop...

what dealers/salesperson at the dealership do you all recommend on the east coast, figure northeast would be best, but anywhere from florida to new england? saw a 2021 Ltd longhorn 3500 DRW, i think the sticker was like 86x, and they are quoting e out the door of like 79k they said some rebates...