Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Mine shows slower than I'm driving so I keep it 6-7 MPH under the speed limit. I'm not much of an electronic guy but I checked out the JScan AH64ID mentioned and the Pro Cal Snap.
All good stuff I wasn't aware of, appreciate the info!
It's not a gasser, don't drive it like it is! Drive easy until she reach's running temperature. Try to avoid short trips, if so at least let the oil reach running temps. Get her out on the hwy and let the DPF/exhaust burn off the soot to avoid problems. Follow the maintenance schedule closely...
No clue on the air ride or alignment button, maybe someone here can help with that. I would think being air ride they would align it to the normal ride height
Hopefully you can find a competent alignment shop that has expertise in Ram HD 4WD trucks.
I try and do it all myself if possible, hard...
I'm no expert but have adjusted my alignment myself several times after having two shop alignments done. Looking at your printout it seems like your Caster is somewhat high at five degrees positive. Mine is closer to 4 degrees positive. Also the Toe needs to be from 0 degrees positive to max 5...
My 2021 shifts pretty decent but like you say from 1-2 sometimes can be a little less smooth. I've owned a few 68rfe's and I'm happy with my Aisin so far.
I wonder if it's in the tune on the 22-24's or hard parts. It would be nice if the dealer could reprogram that tune in the older models HO's.
As long as you first hold the brake pedal down, push the start button, you can let off the brake pedal and it should start. You also have to consider if the intake pre-heater is activated it will delay the starter a few seconds until heated!
Mines a 2021, not sure if Ram has changed anything in...
Jeffn I don't see your truck Signature but I have an HO/Aisin, my oil temp drops but usually shortly after exiting the freeway. My oil temp doesn't cycle up down like yours but stays around 190-200. I think my oil temp has gone over 205 before it starts to drop. Not sure what temperature...
I've been using this full synthetic 10w-30 since the first oil change https://www.mobil.com/en/lubricants/for-businesses/heavy-duty-lubricants/products/mobil-delvac-extreme-10w-30
Running smooth and quiet, stays on the full mark between changes
Your truck looks great. Yep, a little extra work to get it right but happy in the end.
I was wondering if it's since I have the HO/Aisin adding extra weight but I doubt that would lose a 1/2" of lift
I installed the Carli 2.5 system on my 3500. The kit included 1" rear blocks because my truck has the standard rear leaf's. I ended up with 2" of lift from the front springs and the rear blocks made the rear sit 1.5" higher. I ended up removing the rear blocks and looks pretty much level now.
I...