Shocktrooper392
Active Member
- Joined
- Jun 6, 2022
- Messages
- 100
- Reaction score
- 181
So yesterday I tried to install this kit on my 2023 Power Wagon, however when I checked out the BD adapter harness that plugs into the factory fog light harness, I found that it barely plugs in.
There is no tension on the PD adapter plug that goes into the factory connector. You can just barely pull on it and it pops right off. The instructions say to zip tie up the excess wiring when the kit is fully installed but I really don't want to zip tie the connectors together. Just seems kinda cheap for a $450 kit.
I took a video with my phone to show what I'm talking about.
For those of you who have installed this kit before, is this considered normal?? Or am I crazy for expecting a better quality connector that securely clips into the factory harness? Just wanted to ask around before I blow CJC Offroad up on it.
Any input or advice would be appreciated!
There is no tension on the PD adapter plug that goes into the factory connector. You can just barely pull on it and it pops right off. The instructions say to zip tie up the excess wiring when the kit is fully installed but I really don't want to zip tie the connectors together. Just seems kinda cheap for a $450 kit.
I took a video with my phone to show what I'm talking about.
For those of you who have installed this kit before, is this considered normal?? Or am I crazy for expecting a better quality connector that securely clips into the factory harness? Just wanted to ask around before I blow CJC Offroad up on it.
Any input or advice would be appreciated!