flashman252
New Member
- Joined
- Jul 12, 2023
- Messages
- 22
- Reaction score
- 8
-2022 Ram 2500 Cummins motor
-32k mi
-20” rims night edition
-Completely stock
-Cooper st maxx tires installed roughly 25k-27k mi ago since Firestone tires had major failure at 5k mi. Have been rotated and balanced 3 times. Just had it balanced again a week ago to try and fix vibration.
-issue: between 60-65 mph, there is a vibration. Not terrible when empty, could almost just say the road is rough. Towing my bass boat 3 weeks ago to a tournament is when I really noticed it. Last weekend hauled the boat and again noticed it. So next day took it and had tires balanced, kid said front was off by 4 oz. Today, I took boat to lake and back, and it didn’t help a thing. Is this a tire issue or do I need to take it to dealership and have them start checking joints and drive shaft you think?
Also, plan to install fox 2.0 shocks all the way around, going to have thuren 1” lift coils installed up front and thuren track bar installed. At that point I’ll have to get an alignment done. Should I just do this first and see if possibly the vibration is related to stock track bar/shocks or an alignment issue?
Curious what others might do in this situation.
Thanks for all replies in advance.
-32k mi
-20” rims night edition
-Completely stock
-Cooper st maxx tires installed roughly 25k-27k mi ago since Firestone tires had major failure at 5k mi. Have been rotated and balanced 3 times. Just had it balanced again a week ago to try and fix vibration.
-issue: between 60-65 mph, there is a vibration. Not terrible when empty, could almost just say the road is rough. Towing my bass boat 3 weeks ago to a tournament is when I really noticed it. Last weekend hauled the boat and again noticed it. So next day took it and had tires balanced, kid said front was off by 4 oz. Today, I took boat to lake and back, and it didn’t help a thing. Is this a tire issue or do I need to take it to dealership and have them start checking joints and drive shaft you think?
Also, plan to install fox 2.0 shocks all the way around, going to have thuren 1” lift coils installed up front and thuren track bar installed. At that point I’ll have to get an alignment done. Should I just do this first and see if possibly the vibration is related to stock track bar/shocks or an alignment issue?
Curious what others might do in this situation.
Thanks for all replies in advance.