Aftermarket Wheels and Tires - post yours

[BighornHDRam]

Finally received the other 4 tpms from Mopar Wholesale parts and got the 275/70/18 Cooper At3 Xlt Installed on the Battle Born wheels yesterday 18x9 +18. This wheel setup will eventually be going on my 2022 when it shows up but needed to get something for winter as the TransForce tires would not make it through the snow until the new truck shows up and I will end up putting the stock rims on this truck when I go to sell it.

(Edit) I also have to decide if I'm going to install all the Powerwagon fender flares I have on the 2022 as I now know how far the tires will stick out.

 

[skiploder]

17" Method 317s, Titanium color.

Are those 0 offset?

 

[DontSlamMyRam]

Fuel Vector 18" with 18mm offset. Cooper XLT3s 285/75/18. Tire barely rubs F Husky mudflap in off camber turns. Center cap fitment/retention are a joke on these wheels as an FYI.

 

[Rammed]

Stock on 35x12.5r17 on AEV wheels

 

[Rockcrusher]

Has any body installed cooper Discoverer AT/3 XLT 35/12.5 R20 on stock rims.

 

[Grateful Dad]

Has any body installed cooper Discoverer AT/3 XLT 35/12.5 R20 on stock rims.

Not much help on this forum but I did on my 1500

 

[Thompsre08]

Has any body installed cooper Discoverer AT/3 XLT 35/12.5 R20 on stock rims.

I put them on stock rims on my 17 and then moved them over to aftermarket afterwards. I’ll buy them again when this truck comes

 

[DammitDave]

35" Wildpeak M/Ts on 18X8" Vision Rockers. No lift, rubs a little on sharp turns even after trimming some plastic.

 

[Mike75]

Fuel Vector 18" with 18mm offset. Cooper XLT3s 285/75/18. Tire barely rubs F Husky mudflap in off camber turns. Center cap fitment/retention are a joke on these wheels as an FYI.

Easy fix for the center caps…

 

[DontSlamMyRam]

Easy fix for the center caps…View attachment 22740View attachment 22741

I removed the springs retainers on the rear caps giving it enough clearance to wedge in between the hub and wheel. Haven't lost any YET.

 

[Brewbud]

Caps? We don't need no stinking caps!

 

[skiploder]

Battle Born 18x9 +18 w X-ATs (35x12.5x18)



Very impressed w/Battle Born’s customer service. One wheel had a slight bit of damage from shipping….and I mean slight.

Called to ask for a recommendation on how to best repair it and they sent me a 5th wheel that day for free.

 

[406Linetrash]

Battle Born 18x9 +18 w X-ATs (35x12.5x18)

View attachment 23022View attachment 23021

Very impressed w/Battle Born’s customer service. One wheel had a slight bit of damage from shipping….and I mean slight.

Called to ask for a recommendation on how to best repair it and they sent me a 5th wheel that day for free.

Are The x-at's 3 peak rated?

 

[skiploder]

Are The x-at's 3 peak rated?

Nope

 

[GPurcell01]

Sweet another place to post more pictures. 17x9 +18 Method 704 HD's and 37x13.5r17 Ridge Grapplers.





No caps are the best caps.



Truck is stock height and yes I had to trim the pinch weld. No rubbing anywhere else.

 

[BighornHDRam]

Battle Born 18x9 +18 w X-ATs (35x12.5x18)

View attachment 23022View attachment 23021

Very impressed w/Battle Born’s customer service. One wheel had a slight bit of damage from shipping….and I mean slight.

Called to ask for a recommendation on how to best repair it and they sent me a 5th wheel that day for free.

Yes Chris at Battle Born is top notch when it comes to customer service. Love my 5 Battle Born wheels I got and you can't beat the price on them.

 

[Brewbud]

Sweet another place to post more pictures. 17x9 +18 Method 704 HD's and 37x13.5r17 Ridge Grapplers.

View attachment 23388

View attachment 23389

No caps are the best caps.

View attachment 23390

Truck is stock height and yes I had to trim the pinch weld. No rubbing anywhere else.

Looks great! Youmay all ready know this, but those front hubs will rust pretty quickly if you don't get some paint on them.

 

[GPurcell01]

Looks great! Youmay all ready know this, but those front hubs will rust pretty quickly if you don't get some paint on them.

Oh yes I'm aware lol. The front-end is coming apart tomorrow to start installing my Thuren kit if it gets delivered and will have some paint on hand

 

[Brewbud]

Oh yes I'm aware lol. The front-end is coming apart tomorrow to start installing my Thuren kit if it gets delivered and will have some paint on hand

Good cuz @Rockcrawlerdude will call you out on it

 

[Rockcrawlindude]

Good cuz @Rockcrawlerdude will call you out on it

Hey man I’m just tryna keep everybody on their toes