Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
www.oempartsource.com
You can’t use that camera. It’s the digital camera for rear view, so the only digital input on the radio is already being used. You would use 4672735AD. The hardest part is going to be sourcing the connector parts for the factory analog camera.I was thinking go buy this camera and 3D print the body
2019-2020 Ram 1500 Camera 68414414AA | OEM Parts
Genuine 2019-2020 Ram 1500 OEM part # 68414414AA - Camera at OEM Part Source
Sent from my SM-G973U using Tapatalk
Give it a try. The CHMSL with camera is probably one of the most sought after parts (along with the 12” radio module), and people watch car-part religiously for it. Even when they do pop up, the junkyards know what they have, and still get $500+ for it.
It’ll have it’s own separate camera.
Going by the online build configuration tool (which has been wrong before), the digital rear view mirror can only be optioned on trucks that have surround view, which automatically come with the cargo camera. That would mean there is no CHMSL with only the camera for the mirror. There would be 3 different CHMSL with camera part numbers, though:
The only issue with sticking one to that area is getting the cable into the cab sealed. Someone installed one right into the brake light, but the angle wasn’t downward enough. Here’s a kit I found for the existing CHMSL- https://www.ebay.com/itm/Echomaster...kup-Camera-for-13-19-RAM-Trucks-/254100273563
www.crutchfield.com
www.crutchfield.com
tailgatecamera.com
On both options you posted it says it won't fit my truckI ran across a couple of other options while researching the delete plate to hopefully prevent issues interfering with my shell.
Crux CDR-03C
Cargo camera installs under third brake light location of select 2014-17 RAM pickups — connects to aftermarket radioBrandmotion FLTW-7626
Cargo camera: installs in the third brake light location of select 2009-up RAM pickups
They’ll fit. 2019+ HD Rams use the exact same CHMSL/cab as 2009-2018 RamsOn both options you posted it says it won't fit my truck
You’ll have to run the camera signal and return all the way to the radio, and you’ll have to grab ign power and ground somewhere. There’ll be no connector there.
Yeah, they do say that, but we know other people have successfully installed 2020 CHMSL units into Pre-2019 trucks, so I would assume the reciprocal would be no problem.On both options you posted it says it won't fit my truck
Yes
So they actually make different wiring harness for each model?
